How to remove old and fit aftermarket steering wheel

[archers3001]

His guy's well my airbag has deployed and i have taken it out i was told by. Brian R that I may need the whole clock spring capsule and that is going to cost me a good bit of £££. On top of the secend hand airbag and having to get the serv/airbag light reset. So how easy is it to go from this.

To somthing like this

All so how can i tell if the pretensioner has gone off ?
Thank's

PS the car is a 1.4RT 1999

 

[C.slicker]

I assume it was involved in an accident?

If so you will need a new airbag module and front drivers pretensioners at the very least. May also require rear pretensioners (although these can be programmed out by a diagnostics guy).

Sam

 

[archers3001]

I assume it was involved in an accident?

If so you will need a new airbag module and front drivers pretensioners at the very least. May also require rear pretensioners (although these can be programmed out by a diagnostics guy).

Sam

Yer it had a head on in all the snow we had

How do i know if the pretensioner is busted ? I can pull it hard and it locks like any othere car seat belt ?

All so if im going to use a aftermarket steering wheel do i need a new airbag module ?

 

[edde]

You'll be able to tell if the tensioners gone off it will be pulled downwards and cracked the plastic surround around it.

You've a few choices I'm not re writing it I've posted it all here in this posts
http://www.cliosport.net/forum/showthread.php?t=109205

 

[archers3001]

Thanks edde but i dont realy know what the pretensioner is / looks like ?.
And in the pic i cant seem to find the wright plug to fit the resister's in i dont sem to have this plug

Ill have to take some pic's and see if you guy's can tell me the right one to fit the resister's to

 

[archers3001]

bump