clairesclio said:
Hi, Rich
You need to disconnect the battery and wait 20 minutes
Then iirc, you need to prise the front off the wheel and disconnect the airbag. Also have to undo the bolts there.
Actually I'm not much use as cant remember any except the basics!
If your still after an asnwer tonight then i can help
cliospares didnt disconnect my battery at all, and said you'd have to hit the motion sensor to make the airbag go off. he turned the wheel to 90degrees, from which position the two lugs are visible on the back of the wheel. you need to fork these lugs (one at a time obviously) to the side whilst pulling the airbag towards you. you'll feel it click out of place.
once the airbag is loose you have to remove it and disconnect the wire on the back. you will have just the one wire for a standard 1.2 or if you have cruise control you will have two connectors.
there is a bolt that connects the wheel to the boss, so undo the bolt and remove the wheel. place the new wheel into place, and then tighten it back up. then connect the electric terminal and then push the airbag back in making sure that it sits perfectly flush all round.
done.