gez 172
ClioSport Club Member
Defender 110
South Wales buddy.
ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Martin's Clio DCi Van
- Thread starter Martin_172
- Start date
South Wales buddy.
Martin_172
ClioSport Club Member
not just down the road then when im in central Scotland then lol!!
Martin_172
ClioSport Club Member
Another full day spent today, doesn't feel like much progress. The van is fully gutted and the 182 is about an hour's work from being the same so tomorrow the jigsaw puzzle starts and the van can start getting built back up on the inside.
I always laughed at people who strip wiring looms to save weight but now I understand, what a weight in it!!!
I could have got away with using the van interior loom and coding out the ESP I think but since I had both cars I just went the full hog and swapped EVERYTHING even the heater box etc as the van had manual air controls vs the 182 automatic climate with the motors to move the vents etc so its all been swapped so the van will have climate control, cruise control, esp, even the sun visors with the lights lol
I always laughed at people who strip wiring looms to save weight but now I understand, what a weight in it!!!
I could have got away with using the van interior loom and coding out the ESP I think but since I had both cars I just went the full hog and swapped EVERYTHING even the heater box etc as the van had manual air controls vs the 182 automatic climate with the motors to move the vents etc so its all been swapped so the van will have climate control, cruise control, esp, even the sun visors with the lights lol
Martin_172
ClioSport Club Member
My mate is trying to convince me to to this too! I might!!!!
2 of us can't be wrong
Martin_172
ClioSport Club Member
I wanted people to think it was me and that I wasn't fat.
Martin_172
ClioSport Club Member
Got all the interior wiring in today then set about building it back up, the van, having been a work horse for 19yrs had a horrible carpet with oil all over it etc so decided to put the 182 one in, which is in good condition and the 182s got a nicer carpet to begin with, down side, ITS TWICE THE WEIGHT!!!
Stopped for an irn bru break but it's getting there...
Stopped for an irn bru break but it's getting there...
Martin_172
ClioSport Club Member
Thank god the interior is now done, not in a hurry to do that again!
Just the uch to fit properly and head unit to install.
Re fitted the standard steering wheel without cruise control as I'm going to get the 182 one re trimmed as it's past it.
Not sure if the standard non RS dials will work properly but we will soon find out I retained them as the milage matches, I done a white LED conversion and it should be able to go off the clock 😂 182 ones are there if they don't work properly with it.
That's been close to 40hrs and I'm not in a hurry to do it again, however that's the worst of it done.
Job for this week if I get free time is engine out both cars and rear beam swapped over so I can scrap the 182 shell on my drive!
Just the uch to fit properly and head unit to install.
Re fitted the standard steering wheel without cruise control as I'm going to get the 182 one re trimmed as it's past it.
Not sure if the standard non RS dials will work properly but we will soon find out I retained them as the milage matches, I done a white LED conversion and it should be able to go off the clock 😂 182 ones are there if they don't work properly with it.
That's been close to 40hrs and I'm not in a hurry to do it again, however that's the worst of it done.
Job for this week if I get free time is engine out both cars and rear beam swapped over so I can scrap the 182 shell on my drive!
Martin_172
ClioSport Club Member
Been struggling for time recently but had a few hours today so got the engine out so I can get the bay tidied up, master cylinder, abs and brake lines to swap next along with tank and fuel lines
That's a nice sized garage for playing about in.
You'll have to paint and fit the kit now. Sure its a keeper.
Martin_172
ClioSport Club Member
Aye it sold the house to me lol I'm still on the side of no kit!, So it looks like a slightly lowered van and standard
Nahhh, that sounds boring. I've £50 here to buy the kit when you sell.
Martin_172
ClioSport Club Member
your probably getting ripped off at that price going by the nick of this 182 lol
I meant the euro Kit you had off of Toby, not the sport kit.
Martin_172
ClioSport Club Member
that's long gone mate! sold it in the end, it went down south
Martin_172
ClioSport Club Member
Got the bay cleaned up a bit this morning. Job for this afternoon if my 4yr old will amuse herself enough is swap the tank, fuel lines and get the abs, brake pipes and master cylinder off ready for the 182 items
Martin_172
ClioSport Club Member
Martin_172
ClioSport Club Member
It's a DCi 110 6 speed Formula Edition, that's my daily driver now!
Martin_172
ClioSport Club Member
Struggling for time as always! but was day off today so started to tackle the F4R, it had 15yrs and 65k of grime on it so stripped it all down, got the PAS and aircon pumps off it as im not using them, got the top end all painted up, need to get a shot of a Dremel to prep the bottom end and paint it fresh black, quickly threw it back together to see how its looking then took it apart again to save it getting dirty while I finish the rest lol
need to get a timing belt kit and some locking tools for it to do the belt, a fresh waterpump and the pure motorsport aircon/pas delete kit and lightweight pulleys. Then it will get a clutch, thermostat and finally in the van!
tempted to order a set of cams for it while its out but I suppose you need to draw the line somewhere!
need to get a timing belt kit and some locking tools for it to do the belt, a fresh waterpump and the pure motorsport aircon/pas delete kit and lightweight pulleys. Then it will get a clutch, thermostat and finally in the van!
tempted to order a set of cams for it while its out but I suppose you need to draw the line somewhere!
Krarl
ClioSport Club Member
Get some 197 cams for it
You know you want to... I may know of some for sale👀
You know you want to... I may know of some for sale👀
Martin_172
ClioSport Club Member
got another couple of hours on the van today. Managed to swap over the 182 brake master cylinder, ABS System and the brake lines and calipers then the lower arms, hubs and discs.
hoping tomorrow to get the 182 ARB swapped over then bang the engine back in.
The plan was to rebuild it replacing the belts, bushes, arms, wheel bearings etc and build it all up to a nice refreshed state but im struggling for time, and with xmas coming up can only spend so much on it so the ideal now is bang it all together, get it running, enjoy it over the summer then next winter ill pull it apart and do the belts and a refresh on it, as currently ive got 2x of everything with having 2 cars so id like to get it running, get rid of the old shell and anything I don't need and get my drive and garage back!
hoping tomorrow to get the 182 ARB swapped over then bang the engine back in.
The plan was to rebuild it replacing the belts, bushes, arms, wheel bearings etc and build it all up to a nice refreshed state but im struggling for time, and with xmas coming up can only spend so much on it so the ideal now is bang it all together, get it running, enjoy it over the summer then next winter ill pull it apart and do the belts and a refresh on it, as currently ive got 2x of everything with having 2 cars so id like to get it running, get rid of the old shell and anything I don't need and get my drive and garage back!
Martin_172
ClioSport Club Member
Hammered into it this afternoon for a few hours.
Engine and gearbox in
Engine all wired in
Subframe drilled to fit the lower front engine mount
182 brakes, hubs, shafts, suspension all fitted
Back on it's wheels to see how it sits
Job for tomorrow is radiator and all coolant system in, bumper and lights on.
All that's left after that is rear beam, fuel tank and fill all. The fluids!
Engine and gearbox in
Engine all wired in
Subframe drilled to fit the lower front engine mount
182 brakes, hubs, shafts, suspension all fitted
Back on it's wheels to see how it sits
Job for tomorrow is radiator and all coolant system in, bumper and lights on.
All that's left after that is rear beam, fuel tank and fill all. The fluids!
Hi !
Could you take a picture about the drilled hole, or about the lower front engine mount ?
I have a same project, on a SB07.
Thank you
Could you take a picture about the drilled hole, or about the lower front engine mount ?
I have a same project, on a SB07.
Thank you
Martin_172
ClioSport Club Member
Will get one tomorrow from the 182 as the hole is now well and truly filled on the van lolHi !
Could you take a picture about the drilled hole, or about the lower front engine mount ?
I have a same project, on a SB07.
Thank you
When did you change the tank ?
Martin_172
ClioSport Club Member
It's not been changed yet, job for this weekend.
Today I got the bumper, lights, slam panel back on, radiator back in, coolant system all plumbed in engines all wired in, got the battery on it and started testing bits, immobiliser light is staying solid so I'll need to check that out tomorrow with a fresh head, looks awesome with the wide track!
Martin_172
ClioSport Club Member
Done a bit more work today, had the odd bolt that had sheared etc during fitting so went to the scrappys for replacements and replaced everything with the proper bolt, also found I had missed the rear engine loom earth at the top of the gearbox so connected that and that's solved my immobiliser issue!
She now turns over perfectly! so all I need to do is order/fit the pure motorsport PAS/AC removal kit, swap the fuel tank and connect the fuel line, fit the 182 rear beam and then replace and bleed all fluids!
She now turns over perfectly! so all I need to do is order/fit the pure motorsport PAS/AC removal kit, swap the fuel tank and connect the fuel line, fit the 182 rear beam and then replace and bleed all fluids!
Really good work mate . I still have my 1.2 16v on the back of my drive ive owned for 16 years .
Id like to take on the swop the way you have done it . I know if i do it you guys would help with the conversion problems and knowledge.
Most folk say just buy a 182 . Ive done that and it meant nothing to me ! Its that clio on my drive i have the connection with not any other clio . Ive owned it since 18 years of age . Shes called christine . ( from the film of the same name ) because the car has a hold on me so everyone in my family says lol
Id like to take on the swop the way you have done it . I know if i do it you guys would help with the conversion problems and knowledge.
Most folk say just buy a 182 . Ive done that and it meant nothing to me ! Its that clio on my drive i have the connection with not any other clio . Ive owned it since 18 years of age . Shes called christine . ( from the film of the same name ) because the car has a hold on me so everyone in my family says lol
Martin_172
ClioSport Club Member
worth doing mate, to be honest its a pretty simple swap just labour intensive! but worth doing right!
just caught up with this, top work Martin, widetrack van for the win. this one has a legit fast engine in it too, not like our dcis lol
Martin_172
ClioSport Club Member
Cheers mate, looking forward to getting it on the road just really struggling with time, rear beam and fuel tank is all that's left in the way of big jobs then just a few wee bits to re visit and tidy up hoping to have it all done for the spring!
Its the first photo i have seen where you do not look like a complete gimp with a silly beenie on
Its the first photo i have seen where you do not look like a complete gimp with a silly beenie on
When you buy that UR 200, you can come back and slag me! 😂
