Mitre saw recommendations

[Cookson]

I'm going to have to buy a mitre saw for when I'm doing the garage roof and decking. I saw this one in B&Q which I thought was cheap, as it's £240 in MachineMart. Does anyone have any other ideas? I don't want to spend a fortune on something which will barely get used, but also don't want to buy some cheap s**t that breaks after 2 cuts

 

[jam.]

If you're absolutely convinced you need one, and will only need it for a short period of time - why not hire one instead?

 

[Hixle]

I bought one of the cheap screw fix £60 jobbies recently to a) chop up loads of decking and b) to cut the new composite.

It seems robust enough, but I’m left with about a 10mm bit uncut on the underside of decking. Can’t tell you what to go for, but I’d avoid this for decking cutting.

 

[Rob]

I'm going to have to buy a mitre saw for when I'm doing the garage roof and decking. I saw this one in B&Q which I thought was cheap, as it's £240 in MachineMart. Does anyone have any other ideas? I don't want to spend a fortune on something which will barely get used, but also don't want to buy some cheap s**t that breaks after 2 cuts

View attachment 1518622View attachment 1518623

I have a variant of that, had it years, it’s done some proper work. But check the maximum timber size.

 

[Ol’ Tarby]

Bought an evolution one myself few years ago when I did the garden. Used it loads since so was defo worth buying.

 

[aucky]

Erbauer EMIS216S 216mm Electric Double-Bevel Sliding Mitre Saw 220-240V - Screwfix

Order online at Screwfix.com. Side-mounted bevel control for quick and easy bevel adjustments left or right when in the front of the saw, as well as a laser guide for accurate cutting. Supplied with dust bag, TCT blade, clamp and wrench. FREE next day delivery available, free collection in 1 minute.

www.screwfix.com

I’ve been using this one for a few months, seems decent. Swivels in both directions, can plunge and slide cut.

 

[Djw John]

I bought a cheapy years ago that didn't slide. Made it useless for so many things.

So my contribution is buy one for future jobs rather than just the current one

 

[JP83]

I have an evolution one too. It's not had a hard life, but it's had fairly good usage in the last few years.

 

[Ol’ Tarby]

Defo go for a plunge and slide version, and one that you can tilt aswell as rotate

 

[Cub.]

Defo go for a plunge and slide version, and one that you can tilt aswell as rotate

Sounds kinky. I’m in.

 

[dann2707]

I had the evolution and with their blade it's great for cutting metal too which is obviously not what you're after.

For metal the run out is ridiculous and the cuts are not great but for wood it's absolutely spot on.

The slide function worked well too and it doesn't take up too much room as it compacts nicely.

Screwfix is the cheapest I could find it at the time.

I ended up taking it back though because the metal chips got inside the laser housing so wasn't fit for purpose. I took it back and got a small one that just does mitre cuts and doesn't slide as I didn't need anything else for cutting metal now and again.

 

[Krarl]

The one I bought for work. Expensive as f**k but needed a long reach as the ducting I use is 300mm

Scheppach HM120L 305mm Electric Double-Bevel Sliding Compound Mitre Saw 230V

Order online at Screwfix.com. High quality, double-bevel sliding mitre saw provides all-round accuracy and performance. A powerful 200W motor offers a 90mm depth of cut and 305mm cross cut facility, ideal for cutting wide boards. The headstock can be angled to 45° both left and right, allowing...

www.screwfix.com

The one I have that came out of my own money...😂😂

Evolution R210CMS 210mm Electric Single-Bevel Multi material Compound Mitre Saw 220-240V - Screwfix

Order online at Screwfix.com. Multipurpose mitre saw with powerful, high torque motor. Lightweight, compact design with ergonomic handle for easy transport. Utilises professional technology to easily cut steel, aluminium, wood, nail-embedded wood and plastic, using just a single blade. Dust bag...

www.screwfix.com

 

[iimushroomzii]

f**k me you don't need a mitre saw for the job you're doing. Get a circular saw.

 

[Ol’ Tarby]

f**k me you don't need a mitre saw for the job you're doing. Get a circular saw.

No, get both.

Becausepowertool
Becauseman

 

[jam.]

f**k me you don't need a mitre saw for the job you're doing. Get a circular saw.

 

[coolspot007007]

I bought a cheap single bevel (Evo) and then regretted not getting a sliding double when I came to do skirting. I ended up going for something decent the second time round and the biggest I could ever need for a house project (12"). I bought second hand, so it won't be worth 50p if I get rid of it.

I went for a BOSCH GCM 12 SD Professional. You can pick them up for around £300-£350 and it'll be worth that all day long if you sell it.

One downside, it's f**king huge.

 

[Panda.]

Bought a JCB one last year. Slides/tilts and has a laser beam...

 

[ilovewilly]

Circular saw and a speed square to run it along.

 

[donnylad]

I bought a cheap sliding evolution saw from screw fix, great for diy, shite for continuous work. I went through 3 in 3 months whilst my big saw was being fixed, credit to screw fix tho they just swapped them!

 

[Robbie Corbett]

My dad has one of these which I borrow when needed:

Properly solid, but weighs a ton. I think £6-700 10 years ago but you can find them used on eBay for £150ish. Gives really decent cuts.

We have an Evolution at work and for the money its brilliant, with the right blade it also does various metals which is very handy - give a nice cut and has a sturdy chassis. If I was buying for my self just for wood I would get the Evolution + the table.