mk2 ph2 with spacers either 10/15/20 mm

[Plummer]

what sort of spacers do you reckon will bring the wheels out on my non sport on original wheels. Its down pretty low on coilovers so i dont want it to rub etc? 15/20/25mm? what on front? what on back?

I have 13mm on mine and find it fills them quite well, but could probs go 20mm max I would say.

I'm after about 20mm each side but that website is in euros so anyone know a decent UK site?

http://www.lkperformancestyling.co.uk/catalogue

 

[Tigger]

I was on the phone to FK today, their UK registered dealer is Venom Motorsport

The 15mm spacers are hubcentric but they are the System A type, meaning you just use longer bolts to put the wheels on. Will there be any problems with that?

 

[Plummer]

Thats what I'm using but with 13mm spacers (FK).

Had no problems so far while they've been on the car (had them fitted a week ago).

 

[ninjapirate_]

this is a shockingly rubbish picture i know but its the only one i've taken since i fitted my spacers.

i've got 15mm hubcentric spacers on the rear wheels.
(also couldnt resist showing off a bit of cheeky snow foam action )

 

[aberdeen172sport]

i really like the 30mm spacers on the first replies pics, would i be able to fit them to my 172 ph2 with its standard alloys.
i dont think its been lowered b4, do u think i'd need 2 lower it 2 get the same effect?

 

[quikshine]

LK Performance Styling suck! messed me around something shocking so I cancelled the order after 3 weeks of spoofing..

 

[scott1205]

they were fine for me came quick as out a was very happy

 

[Tigger]

15mm or 25mm £53.99 for the pair, so £107.98 for all 4

http://cgi.ebay.co.uk/Hubcentric-Wh...1QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247

Just wondering, what's the difference (apart from price) between these and the FK ones?

Cheers

 

[Tigger]

Also, which bolts do you need for the FK System-B ones?

 

[Plummer]

Just wondering, what's the difference (apart from price) between these and the FK ones?

Cheers

FK's are made of aluminium, them ones are steel.

And system B require no bolts, they come with everything you need, it comes with 4 bolts to bolt the spacer to the hub and you then use the original bolts to bolt the wheel to the spacer.

 

[Tigger]

Aluminium spacers being better ones then?

As for the bolts, that's all I needed to know - thanks

 

[Plummer]

Don't know if they're better... But they are lighter!

 

[Tigger]

Done - 20mm all round

 

[Rincin]

So..Any pics Tigger.

 

[Cro]

Think he means just bought

 

[aberdeen172sport]

so do u need 2 lower the car 2 make the spacers worth while?

 

[Tigger]

Mine's on Eibach Sportlines at the moment - wheels are lost though lol

 

[st3ve]

I would say to lower the car before thinking about spacers as the gap between the top of the tire and the arch is worse looking than offset wheels.

 

[Tigger]

It is lowered lol :rasp:

 

[st3ve]

Sorry I was referring to posts made previously asking whether or not to get spacers before lowering the car.

 

[J88NES]

Any more pics of 1*2's with spacers?

 

[Tigger]

Mine with 20mm FK Hubcentric's

Before spacers

After

Took them off though until I figure out what the noise was lol

 

[jesus]

Took them off though until I figure out what the noise was lol

Might have been that you didn't clean the hub before you put them on.

 

[Tom@JMS]

Just a note - I have some new 15mm Hubcentric type B wheel spacers for sale for cost price if anyone is interested

http://www.cliosport.net/forum/showthread.php?t=422156

 

[fil_b]

Mine with 20mm FK Hubcentric's

Before spacers

After

Took them off though until I figure out what the noise was lol

do you need longer bolts with these???

 

[Tigger]

Just a note - I have some new 15mm Hubcentric type B wheel spacers for sale for cost price if anyone is interested

http://www.cliosport.net/forum/showthread.php?t=422156

My 20mm ones were same spec as yours, direct from FK too. Sold them for £30 cheaper than you are after lol

 

[Tom@JMS]

lol your a plonker then

I haven't even opened the box as they were a spare set. I'll just send them back if no one wants them by Monday!

 

[Tigger]

Haha Del-Boy!

I had 1 pair of mine fitted (above pics lol)
Just want something a bit more subtle than that now, and maybe studs too.

 

[Tom@JMS]

Where they type B or Type A hubcentric? Not a fan of the type A (longer bolts hold the spacer on like sandwich).

I have the trophy offset turinis so are quite deep in the arches, the 15mm is ideal for them

oh... want to buy my 15mm set?

 

[Tigger]

PM me your bottom dollar

fil b - no mine bolted to the hub then the wheel bolted to the spacer with the normal bolts

 

[Tom@JMS]

£180 posted next day courier geezer, as said in the FS thread, otherwise I might as well send them back lol!