ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

My 1.2 16v Dynamique



  Liquid Yellow 182 FF
Well my coilovers arrived today :D

Camber bolts, spacers, new top mounts and now my coilovers. Now I'm set to fit them

164884_10150134582850992_526050991_7737115_6435338_n.jpg
 
haha, no worries, I was like erm wtf does that mean! Yeah, cheap as chips mate :approve: Really want to go lower than 40mm.

The exhaust is a piece of piss to fit tbh mate, its just hassle getting your old one off if its rusty. Make sure you get new hangers though, if yours are anything like my old one they"ll be fucked and your exhaust will sag.
]

Yeah i had a new hanger put on last year as it had broken. Think im going to get a powerflow one now anyway. Charlie gave me a quote of £265 fully fitted for a full stainless steel cat back with 3.5" rolled tip, Seen some vids as well and sounds spot on.

Now then lad, get those coilovers fitted and deck it
 
  Liquid Yellow 182 FF
]

Yeah i had a new hanger put on last year as it had broken. Think im going to get a powerflow one now anyway. Charlie gave me a quote of £265 fully fitted for a full stainless steel cat back with 3.5" rolled tip, Seen some vids as well and sounds spot on.

Now then lad, get those coilovers fitted and deck it

Fair play mate, that should sound sick.

Yeah, im dying to get them on, but need to wait for the weekend to fit them with my mate :dapprove:
 
  clio mk2 1.6 16v
ahh you dont need your friend to help you fit them lol fit em yourself dead easy mate!! but i suppose extra hands wouldnt go a miss with helping to hold stuff up etc lol yeah ill check this thread saturday mate
 
  Liquid Yellow 182 FF
ahh you dont need your friend to help you fit them lol fit em yourself dead easy mate!! but i suppose extra hands wouldnt go a miss with helping to hold stuff up etc lol yeah ill check this thread saturday mate

I don't have the balls to! LOL! Ive never done anything like that before and I'm scared of messing it up and causing damage! Id rather just getting all done properly and not have to worry, lol.
 
  clio mk2 1.6 16v
ahh at least do the back yourself lol that is dead easy jack the rear up, un do 2 bolt take the spring out replace it with new one and replace the shocker and to bolts back up done lol
 
  Liquid Yellow 182 FF
Finally got the coilovers on!

Didnt need my 25mm spacers as suggested by a few people, looks great but I would like my wheel bearings. So I will be selling my 25mm hubcentric spacers very soon, as id like to make back my £50 :dapprove: I also didn't need my camber bolts which cost me £40 from Ktec :dapprove:

Anyway, need to get my tracking done on monday, and I will bring the back down abit lower to, the height at the front is actually pretty good atm, haven't had an scrapes on any speed bumps (yet)! The ride is ermmm pretty rough but Its alot better than my 40mm springs. Overall I'm impressed, but only time shall tell.

Couple of shitty phone pics, need to give her a clean up and take some decent pictures, but you get the idea.

168627_10150137613605992_526050991_7775881_6882622_n.jpg180810_10150137613405992_526050991_7775876_3350484_n.jpg180345_10150137613130992_526050991_7775867_1264277_n.jpg
 
  Clio 172 2.0 16v
Finally got the coilovers on!

Didnt need my 25mm spacers as suggested by a few people, looks great but I would like my wheel bearings. So I will be selling my 25mm hubcentric spacers very soon, as id like to make back my £50 :dapprove: I also didn't need my camber bolts which cost me £40 from Ktec :dapprove:

Anyway, need to get my tracking done on monday, and I will bring the back down abit lower to, the height at the front is actually pretty good atm, haven't had an scrapes on any speed bumps (yet)! The ride is ermmm pretty rough but Its alot better than my 40mm springs. Overall I'm impressed, but only time shall tell.

Couple of shitty phone pics, need to give her a clean up and take some decent pictures, but you get the idea.

View attachment 50869View attachment 50870View attachment 50871


Sh*t me ! That looks awesome man ! Got any pics of the height at the rear ? front looks spot on, making me really want coilovers now.:evil:
 
  Liquid Yellow 182 FF
Sh*t me ! That looks awesome man ! Got any pics of the height at the rear ? front looks spot on, making me really want coilovers now.:evil:


Cheers mate, Im going to take some decent pictures probably tomorrow, as I havent been able to give her a clean yet, she's covered in salt and much, I also need to get the back lowered a little more,.
 
  Clio 172 2.0 16v
Cheers mate, Im going to take some decent pictures probably tomorrow, as I havent been able to give her a clean yet, she's covered in salt and much, I also need to get the back lowered a little more,.

Ahhh yeah, mine needs a good clean again, hate this weather. Yeah the back is riding a little high in comparison to the rest. The front end looks sweet as though mate.
 
  Liquid Yellow 182 FF
Ok, today managed to get her cleaned up and took a few snaps, pleased with it so far, although I'm going to lower the back some more tomorrow.

gi.jpg


IMG_0220.jpg


IMG_0218.jpg


IMG_0216.jpg


IMG_0215.jpg


IMG_0214.jpg


IMG_0213.jpg
 
Last edited:
Yeah bring the rear down and it will be spot on. Get some 5/10mm spacers for the rear as well, just to bring it out a bit and will be spot on.
 
  Liquid Yellow 182 FF
Posted a thread on the K-Tec section on here asking about it, but it literally wont go any higher, so I gave up and left it.
 
Ktec 'stealth' it wont go any higher :dapprove:

You're not trying hard enough ;)

5370438476_d3f09fb53a_z.png


Mega surprised you didn't need spacers OR camber bolts! My set up must have been awfully strange... :S

Looks awesome though! How are you finding the ride etc?
You should just be able to send your camber bolts back to K-tec. I did when mine I bought the wrong ones.
 
  Liquid Yellow 182 FF
You're not trying hard enough ;)

5370438476_d3f09fb53a_z.png


Mega surprised you didn't need spacers OR camber bolts! My set up must have been awfully strange... :S

Looks awesome though! How are you finding the ride etc?
You should just be able to send your camber bolts back to K-tec. I did when mine I bought the wrong ones.

Yeah I was to, im going to send back the spacers, then try and do the same with the bolts. The ride is ermm, well bouncy, but its nice, I love the cornering in it now :cool: Had no scrapes so far, so Im happy with the height, but will putting the back down tomorrow.
I may be popping down to K-Tec soon to get my exhaust sorted, but how did you get it so high?!?!? PLEASE DO TELL!
 
Last edited:
  Liquid Yellow 182 FF
lol ok, I've seen your video of your stealth on youtube. how loud is it when the engine is started and at tickover?

haha, I dont mind. Erm its loud when you first start it up, on idle its not loud at all tbh. Very nice sounding system. Definitely get the supersport system though.
 
  Liquid Yellow 182 FF
Popping down to K-Tec tomorrow to get my backbox sorted, backs going lower tonight to.
 
  Liquid Yellow 182 FF
Okay, soooo, whacked the back down to the lowest setting still with the adjusters, I am very pleased with the height. Here's a quick pic of it tonight in a zee fog on my phone lol. Will get some decent photo's tomorrow.

167571_10150139614900992_526050991_7808392_1213197_n.jpg
 

Attachments

  • 167571_10150139614900992_526050991_7808392_1213197_n.jpg
    167571_10150139614900992_526050991_7808392_1213197_n.jpg
    36.4 KB · Views: 45


Top