ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
MY EP3
- Thread starter kpowell911
- Start date
Hondata'd EP3 Type R
Tegiwa one yea, Perhaps should have gone Silver ?
Declared the Air filter tro admiral, £23 with the admin fee
Declared the Air filter tro admiral, £23 with the admin fee
Astra GSI, 172, Golf
msg my mate, he runs this company http://www.hondatyperbreakers.co.uk/ they may have some decent upgrade parts knocking about for you.. tell them perry passed you on.
Hondata'd EP3 Type R
Supersprint one?
Hondata'd EP3 Type R
Crikey, I seem to be Isolating myself!
The CTR Forum seem to hate Tegiwa for copying Gruppe M, and If I get Rota's, the JDM boys on here will Crucify me
The CTR Forum seem to hate Tegiwa for copying Gruppe M, and If I get Rota's, the JDM boys on here will Crucify me
Them lot hate Tegiwa for everything.
As soon as i posted the pic of my Tegiwa on my JDM, its like id shot someone in the face. "You just dont do it apparently" FUUUUUUUUUUUUU
As soon as i posted the pic of my Tegiwa on my JDM, its like id shot someone in the face. "You just dont do it apparently" FUUUUUUUUUUUUU
Trophy #392
What was it like going from a clio to a type r?
Hondata'd EP3 Type R
I went from a 1.2 Clio so it was alot more powerful, BUT the biggest difference I found was how much bigger the Civic feels to drive!
It is just because it's a gruppe m. Daft really!
Second hand they aren't to bad. Seen some go for £350 up to £400.
That isn't too bad, I'd never pay full price for one though!!
That isn't too bad, I'd never pay full price for one though!!
This is my tegiwa, I've sold it
Hondata'd EP3 Type R
Ha, I've bought Bens Tegiwa, I believe he has a few tricks up his sleave.
I had it fitted perect, but its started knocking on the bulkhead coming off throttle, So I've put some sticky back foam behind it which should sort it out
It sounds very nice though.
Rim Refurb and lowering next
I had it fitted perect, but its started knocking on the bulkhead coming off throttle, So I've put some sticky back foam behind it which should sort it out
It sounds very nice though.
Rim Refurb and lowering next
Hondata'd EP3 Type R
Nothing major but....
Bought some minor Bits.
2x Genuine Mugen Socks (Only fitted one)
Genuine JDM Mugen Tax Disc Holder and the Second Sock
Also ordered but still waiting on:
Password:JDM Red Billet Battery Bar
Tegiwa Carbon Fibre Intake Cover
Carbon Fibre Spark Plug Cover
Started buying the suspension bits too
ABP/Eibach -30mm Lower Springs
Eibach Front Camber Bolts
Eibach Rear Camber arms
I've also freshened up the lighting. No HID covnersion, just some Xenon Esque Number Plate Bulbs, and I've got new side lights and Main/Dipped Bulbs to fit once I figure out how you get to them
Bought some minor Bits.
2x Genuine Mugen Socks (Only fitted one)
Genuine JDM Mugen Tax Disc Holder and the Second Sock
Also ordered but still waiting on:
Password:JDM Red Billet Battery Bar
Tegiwa Carbon Fibre Intake Cover
Carbon Fibre Spark Plug Cover
Started buying the suspension bits too
ABP/Eibach -30mm Lower Springs
Eibach Front Camber Bolts
Eibach Rear Camber arms
I've also freshened up the lighting. No HID covnersion, just some Xenon Esque Number Plate Bulbs, and I've got new side lights and Main/Dipped Bulbs to fit once I figure out how you get to them
Hondata'd EP3 Type R
All of them in the front light lol
Hondata'd EP3 Type R
How do you get the arch lining out? Wheel off jobby?
Philip.
ClioSport Club Member
VRS 245
Side lights are a c**t to do, replaced mine a week or two back.
Front two clips, pop them out, then bend the arch lining a bit, it wont snap even though it looks like it may.
And its a bloody tight squeeze but its easy enough when you're in!
Im having trouble getting my number plate bulbs off the back
Front two clips, pop them out, then bend the arch lining a bit, it wont snap even though it looks like it may.
And its a bloody tight squeeze but its easy enough when you're in!
Im having trouble getting my number plate bulbs off the back
Hondata'd EP3 Type R
Side lights are a c**t to do, replaced mine a week or two back.
Front two clips, pop them out, then bend the arch lining a bit, it wont snap even though it looks like it may.
And its a bloody tight squeeze but its easy enough when you're in!
Im having trouble getting my number plate bulbs off the back
I'm the opposite, found the number plate ones fairly easy, but took the clips out and couldnt bend the arch lining for s**t
Hondata'd EP3 Type R
More Toys
Password:JDM Battery Bar (which I think is wrong)
Carbon Fibre Inlet Cover
Legendary Eibach/EP3 Spring kit
Fitted some of it
Sorry engine bay isnt clean, Im off tomorrow So Ill clean the lot
Heres why I think the Battery Brace is the wrong one
Password:JDM Battery Bar (which I think is wrong
)Carbon Fibre Inlet Cover
Legendary Eibach/EP3 Spring kit
Fitted some of it
Sorry engine bay isnt clean, Im off tomorrow So Ill clean the lot
Heres why I think the Battery Brace is the wrong one
Hondata'd EP3 Type R
Christ those pics are attrocious! Ill get bettter ones tomorrow
260% JCW
Prefer the OEM look TBH.
Hondata'd EP3 Type R
I did think that, it fits the battery fine, but not the bolt pattern :-/
Hondata'd EP3 Type R
Queue the haters.
Lowered 30mm all round on ABP/Eibachs.
Obviously the car is filthy, bit worried about cleaning it in case I turn the drive into an ice rink again!
Terrible picture of a few more carbon bits in the bay and my £35 Mugen Rad cap (dont ask!)
Next up, Get the Camber Bolts/Arms fitted and a FRSU, although my mate said it would be best to perhaps let it settle for a bit first.
The MOT/TAX and Tyres.
Next mods are going to be RBC Inlet Manifold, DC Header, R8BYP B Piper with stock back box. Then Remapped
Lowered 30mm all round on ABP/Eibachs.
Obviously the car is filthy, bit worried about cleaning it in case I turn the drive into an ice rink again!
Terrible picture of a few more carbon bits in the bay and my £35 Mugen Rad cap (dont ask!)
Next up, Get the Camber Bolts/Arms fitted and a FRSU, although my mate said it would be best to perhaps let it settle for a bit first.
The MOT/TAX and Tyres.
Next mods are going to be RBC Inlet Manifold, DC Header, R8BYP B Piper with stock back box. Then Remapped
