PH1 172 Alarm Ultrasonics

[caister]

Was just cable tying a wiring loom up under the glove box when i notcied a neatly wrapped wire with a connector on the end of it (not connected to anything).

It took a matter of minutes to trace it back to the ultrasonic sensor thats on the A-pillar which explains why I have never been able to get the alarm to go off when i'm inside the car and its locked. I can only assume the one on the drivers side has never been connected either. Where should these sensor's plug in?

Thanks

 

[edde]

The alarm should be under the passenger side airbag or under the scuttle panel.

Does your car even have a working alarm it could have been removed thats all.

 

[caister]

The alarm led flashes and if i lock the car with the door open a long never ending beep comes from the car like a fire alarm. So I assume the alarm is connected.

 

[edde]

Try opening the doors/bonnet when the cars locked see if it sets the alarm off.

 

[caister]

Have just tried opening the bonnet when the car is locked and an alarm does go off. Is there much pouint in reconnecting the ultrasonics as I think they might cause more trouble than they are worth.