quick few questions

[Nafoff]

now i know which order i am polishing / waxing in

just forgot a few little bits

i am using SRP then EGP

now is it....you apply the SRP then leave it

or

apply the EGP then leave it.....?

i know its better to apply more than 1 coat of one of those polishes too, but can't remember which.....

cheers

 

[Djw John]

SRP then off then EGP which you leave for an hour then take that off

 

[Nafoff]

thought so

as it is relatively warm here i think i may do panel by panel too

is it several coats of the EGP too?

 

[Djw John]

Yeha you build up the egp over time

 

[Nafoff]

sweet, well i will go get to it then

detailling thread up later maybe

 

[Tigger]

Dont put the EGP on in the sun - will be a fam ducker to get off! plus you'll probably swirl the paint doing-so

 

[Rich]

Work in the shade, todays weather here for EGP would be a nightmare to remove.

 

[Nafoff]

well chaps....i have applied the SRP and taken that off, was no problem at all, i think its cooled slightly since this morning,

i have now applied 1 coat of EGP and taken it off, and then the 2nd coat has been applied, and sure enough just as i finished applying it the heavens have opened

will i be alright afterwards to just go and wipe it off again?

 

[Rich]

The second layer has probaly not done much apart from ensuring even coverage - AG say to leave it 12 -24 hours between layers to allow it to set up and bond.

I would rewash the car and then try and remove it.

 

[Nafoff]

cheers rich

you reckon its worth adding natty's blue to the top at some point or you not reckon it will have much affect on the silver?

 

[Rich]

Worth a shot as it gives a clear wet glossy work, how much difference you will see on Silver I am not sure. Just washed the 306 and polished one panel, it did not look any different so stopped left the rest!

 

[Nafoff]

lol....i noticed the difference in the pop after today

its had its first proper clean from me where i also clayed it initially too