Rear Arch Liner Securing Tab

[t90_lle]

As the title suggests I require information regarding the securing of the rear arch liner as mine decided it doesn’t which to be part of the car anymore.

I’ve had a stab around the rusty mound where it secures but I thought they were all done with plastic push fits. Any information would greatly be appreciated.

 

[Louis]

As the title suggests I require information regarding the securing of the rear arch liner as mine decided it doesn’t which to be part of the car anymore.
View attachment 1576710View attachment 1576711View attachment 1576712View attachment 1576713
I’ve had a stab around the rusty mound where it secures but I thought they were all done with plastic push fits. Any information would greatly be appreciated.

Drill out the stud and fit a rivnut. Make sure you use some silicone on the inside so it doesnt leak. Then use a bolt through with a big washer 👍

 

[Clio_fool]

@RenaultRy do you have a rear liner for sale?

 

[frayz]

Pics when I did mine.

 

[t90_lle]

@RenaultRy do you have a rear liner for sale?

Thanks @Porl I’ve sorted one.

Pics when I did mine.

Cheers mate, now I know what I’m working with! 👍🏻

 

[SKINTasPER]

Yes I've got rear liners

 

[DomP182]

Pics when I did mine.

Needs a clean that! 😉

 

[frayz]

Needs a clean that! 😉

Did it again today. Gets bloody awful doing 250 mileS a week in these conditions.

 

[t90_lle]

Pics when I did mine.

@frayz When you did these do you happen to remember if there was a nut there already or if you fitted rivnuts to attach the liner? From the pictures it looks like there is a nut already in situ to be used.

 

[RustyMojo]

I had to drill out and then rivnut mine.

 

[frayz]

@frayz When you did these do you happen to remember if there was a nut there already or if you fitted rivnuts to attach the liner? From the pictures it looks like there is a nut already in situ to be used.

Its a captive stud and nut as per OEM. The stud sheared off like yours has. Drill what’s left of the stud out and fit a riv nut, and then add an M6 bolt mate.

 

[npt]

I would just leave it off, it doesn't do that much anyway tbh