ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
Due to ongoing maintenance work some features and functions (including Dark mode!) may be unavailable or visually appear differently.
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
respray
- Thread starter J03
- Start date
Punto/Clio GTT
any damage?
new door?
from £150 upto £300, dependant on damage etc can give better price with more details
new door?
from £150 upto £300, dependant on damage etc can give better price with more details
Punto/Clio GTT
bout £200
Punto/Clio GTT
from what wede charge at work roughly
Punto/Clio GTT
dunno what you mean by professional, its a average sized unit with spray booth and our own mixing scheme
Punto/Clio GTT
wednesbury, west midlands
i have pretty high standards yup, couple of my workmates dont.
if im honest, ill look at a car and judge how good the repairs gotta be. if im working on a rusty transit van ill have it knocked off in no time, if im working on an evo or beemer, then ill take as long as needed and get it bang on
i have pretty high standards yup, couple of my workmates dont.
if im honest, ill look at a car and judge how good the repairs gotta be. if im working on a rusty transit van ill have it knocked off in no time, if im working on an evo or beemer, then ill take as long as needed and get it bang on
MX5 1.8
nice
basically needs a new coat of paint (correct paint that is) i have a picture. you'l defiinatly notice why am needing a good reasonalble priced respray
Punto/Clio GTT
probably best painting the wing too mate and do the whole side.
you'll notice colour match alot less bonnet to wing compared to wing to door as its different angles.
id say £200-£250
you'll notice colour match alot less bonnet to wing compared to wing to door as its different angles.
id say £200-£250
Punto/Clio GTT
yea but if you paint to the wing its just gonna be a solid edge as you gotta paint right to the end of the door, then youre just hoping it matches next time. If you prep the wing too, blow basecoat accross the side (not on the top) and then laquer the whole wing, itll still be the same colour to the bonnet, but the door will be blended nicely into it too.
wings on clios will always look slightly different anyway due to them being plastic
wings on clios will always look slightly different anyway due to them being plastic
Punto/Clio GTT
could do it in a day easily
FOR SALE!!!
if there is no damge etc is very easy al you have to do is take of bumpstrips etc then go over the hole side with a type of brilo pad to ruff the old paint up then get ya new mix over it blend it in lauqer it and bake it which at my old place tookgive 20 mins and then go over it with a PC machine put bumpsips back on job dun
Punto/Clio GTT
as leigh says, if the surface is good to paint onto, it just needs
-going over with a grey scotchbrite and some panel wipe (10 minute job),
-blow it off, clean it up (5 minutes)
-mask up tailgate, roof, strip between the door n quarter, windows, bonnet and bumper. then bag the car up (hour tops)
-preclean, tackrag (5 minutes)
-paint/laquer/bake (hour tops)
-nib out any bits and mop it up (30-45 minutes)
so about 3 hours work non stop, realistically about 4
if the old paint aint very good though it will need wet flatting instead of scotching
-going over with a grey scotchbrite and some panel wipe (10 minute job),
-blow it off, clean it up (5 minutes)
-mask up tailgate, roof, strip between the door n quarter, windows, bonnet and bumper. then bag the car up (hour tops)
-preclean, tackrag (5 minutes)
-paint/laquer/bake (hour tops)
-nib out any bits and mop it up (30-45 minutes)
so about 3 hours work non stop, realistically about 4
if the old paint aint very good though it will need wet flatting instead of scotching
