ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
RR Result at RS Tuning
- Thread starter kevo66
- Start date
iimushroomzii
Toilet roll king
Transit Connect.
Not too bad a result mate.
They dont start at 197bhp, its 197ps, which i think is 194bhp?
182
good result that fella
you got before and after figures? whats it doing at the wheels?
you got before and after figures? whats it doing at the wheels?
Well, Pauls amazingly acurate RR has brought me down to earth and proved what everyone says about the 197 is true, as standard its not 197BHP!!!
Had it RR'd before the cams, re-map and matched and skimmed inlet go on at...........
187.5BHP
..then you take it to a different RR and you'll get a different result again.
182
sorry just realised thats before LOL, in that case its an even better result!
"Navy" N17 TWO
Same as the 1*2s
Standard is 172/182 PS, the 172 is meant to be about 168 bHp as standard, not sure what the 182 is, guessing 178?....
172 5HED
Why not?? They were taken off and matched first. Skimming it a little ensures the surfaces are perfectly flat hence a better seal when bolted back as Im sure you know.
Bio, I'm aware that on other rollers it will be alot more but these are bang on the money. We'll see what I get after the work tomorrow, car is on 11.5k miles. What rollers were the other two you mention tested on as you cant really compare between them TBH
Bazzoon, the blue bad boy was on the rollers when I got there, sounds as good as it looks!!
182
172ps > 166bhp
182ps > 176bhp
194ps > 194bhp
dont seem to make sense to me but thats what the site quotes
182ps > 176bhp
194ps > 194bhp
dont seem to make sense to me but thats what the site quotes
so it started off with 194bhp as standard then. Apparently.
172 5HED
B/G 182 + PH1 Track
its bloody loud when on the rollers, good to know pauls getting it sorted for us though !
rps13
haha just thought it would be a waste of time spending half an hour setting up a mill.
surely it's no more than a year old and the gaskets would just drop off anyway.
172 5HED
I never heard it running on them mate just when he took it out!! Mine was loud enough on the rollers but that would've burst my ear drums, love the badges on the side too, made me laugh!
182
totally standard car made 96.6% of manufacturers claimed output. when you consider tolerances and the fact that the car will still loosen up futher its a good result mate
172 5HED
172 5HED
Well it has a decat and miltek mate but on a standard map, Paul says its good so it'll do for me!! Im just hoping I get a nice little gain tomorrow!!
White Sti Hatch
try about the rollers mate but i can say that the Rollers were spot on imo and all other 20+ cars that were run would say the same i think, hense why were goin back in a week or so....
Was done at Falkland Performance in Glenrothes
Was done at Falkland Performance in Glenrothes
172 5HED
try about the rollers mate but i can say that the Rollers were spot on imo and all other 20+ cars that were run would say the same i think, hense why were goin back in a week or so....
Was done at Falkland Performance in Glenrothes
Could well be true but the 201bhp one, what was it running to make that??
I saw a clio182 make 191.2 BHP on a set of rollers with an exhaust and filter??!
White Sti Hatch
Bogo standard mate just ragged the tits off it from Day one ! (After it had warmed up though obv! )
All the results from the day, http://www.cliosport.net/forum/showthread.php?t=301052&highlight=Scottish+Rolling+Road+Day
Finished list on page 3/4 i think
172 5HED
Hmm, well if you say its right its right, im not here to argue but that seems a hell of alot for a standard car, it really does!! But Im no expert!
Adey.
ClioSport Club Member
uh o, another lets get hung up on rr figures thread
182
i keep banging on about having a sticky for rr FAQ
try about the rollers mate but i can say that the Rollers were spot on imo and all other 20+ cars that were run would say the same i think, hense why were goin back in a week or so....
Was done at Falkland Performance in Glenrothes
Think the point is, if all these cars went down to RS Tuning or any other rolling road for that matter, the figures would be different even if you do belive these particular figures to be accurate.
White Sti Hatch
Im not saying there spot on mate nor am i arguing they are im just saying compaird with what 2 ran at out RR Day it seems a tad low.
B/G 182 + PH1 Track
think you missed the point agen..
deffo! no need to give yourself the hump with the RR results mate.
RSTuning
ClioSport Club Member
R35 GTR
Unless you are taking the engine out then the fly figures are never EVER 100%.
Repeatable results are however important and i can offer this on our dyno/dyno dynamics in general. Our new dyno has been within 1hp on all the cars we previously dyno'd on the 2WD.
The reason for the test today is to check gains from these cams Not for the out and out numbers.
Repeatable results are however important and i can offer this on our dyno/dyno dynamics in general. Our new dyno has been within 1hp on all the cars we previously dyno'd on the 2WD.
The reason for the test today is to check gains from these cams
Not for the out and out numbers.brisa4984
ClioSport Club Member
renault quoted ps - 10 = real bhp.
