RS200T EDC - Brembo Conversion

[Triple J Motorsport]

ROFAG selling new 197 and MKIII RS200 Brembo calipers on ebay but you need an adptor to fit on the RS200T

Anyone know where you can buy the adptors?
Do you retain the standard brake disc?
Do you need wheel spacers?
If I do the conversation I'll swap the brake hoses too for braided lines, any views on the best ones?
Is it worth the effort & cost just to look lovely or would just putting some DS2500s in the standard caliper set up be as good.

Going to change the front pads to DS2500 before playing on a track so want to do this conversation first if it's not a massive ball ache.

 

[Cropper]

I too am looking at doing this.. Did you find out any information?

 

[Matt Cup]

@Ricardos did a conversion on his 220 trophy

 

[Cropper]

Cheers I’ll try and find it ??

 

[Kev@KAM]

We do the Pure Motorsport kit. Its not a cheap conversion but its worth it for the sheer choice of pads if you are using the car on track a lot.
https://www.kamracing.co.uk/car-tun...rt-brembo-brake-bracket-kit-renaultsport.html

 

[JamesBryan]

I wonder if the Megane 250 calipers would fit on these ?

 

[Ricardos]

Page 2 in my project thread

https://www.cliosport.net/threads/ricardos-pearl-white-220-trophy.818052/page-2

 

[Ricardos]

Brembo whoring

 

[Ricardos]

I wonder if the Megane 250 calipers would fit on these ?

Meg 250 are a different offset and believe they use bigger discs. It might mean reworking the PMS brackets or designing new to make the different offset work. The Meg boys run 17" wheels on their 250s so it's potentially doable, with a bit of work.

 

[Ricardos]

To make the 4 pots work
R26 calipers (Red to match OE)
PMS 4 pot bracket kit
Brake hoses from PMS sold separately
Brake pads, I'm using OE R26 brake pads
Have to use min 16mm spacers to clear the wheels
I bought Mr Pink pins as they're better than OE pad retaining pins
Motul 600 RBF brake fluid
Use the OE 320mm discs

Its about, give or take a couple of quid £600 for everything mentioned.

I bought the calipers 2nd hand in decent nick,

Bracket kit and brake hoses from PMS.

Brake pads from Renault.

Mr Pink pins from Turborenault

Motul 600 RBF fluid from Kam Racing

Pad retaining brackets 2nd hand freebie

 

[JamesBryan]

Meg 250 are a different offset and believe they use bigger discs. It might mean reworking the PMS brackets or designing new to make the different offset work. The Meg boys run 17" wheels on their 250s so it's potentially doable, with a bit of work.

Yeah 340mm discs on the MK3 Megane.