ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Seats have arrived!!



C

Clio_Craig

after a 2 week wait, my cobra daytona's trimmed in black vinyl/leather harneses and the new extra low subframes turned up :D going to try and fit them on saturday, can any 1 tell me wat i need to look out for/do?

thanks craig
 
got any pic's .

fitting is easy .

bolts are under the car rubber cover's on them . you will need to disconnect the battery or the air bag's may go off in your face (not good ) . fit new seat's and harnesses and connect battery up and hey presto .
 
C

Clio_Craig

nice one tim :D i have got some pictures will post them up later as im at work
 
  Leon Cupra R 225
got any pic's .

fitting is easy .

bolts are under the car rubber cover's on them . you will need to disconnect the battery or the air bag's may go off in your face (not good ) . fit new seat's and harnesses and connect battery up and hey presto .

lol @ the airbags comment! would be most amusing :rasp:
 
C

Clio_Craig

i was thinking, it wud be amusing after i have cried, those are the moments where u just cant help but laugh
 
C

Clio_Craig

nah youve been frammed i can earn some money bk on the seats!!
 
C

Clio_Craig

bk on a serious note, wat airbags do i ave to turn off etc and how do u stop the airbag light coming on etc etc
 

mossyv6

ClioSport Club Member
  Trophy,V6,5GT,AG200
You have to fit 2.7 ohm resistors (Maplins) into the electrical circuit under the seat.
 

mossyv6

ClioSport Club Member
  Trophy,V6,5GT,AG200
Heres a couple of piccies mate:

airbagresistor.jpg


airbagresistor_2.jpg


Just disconnect the black connector underneath and push the resistor into the remaining half into the 2 coloured metal sleeves ......not the black wired one as this the earth. The resistor fools the computer into thinking the airbag is still present.

PS. These piccies are from a v6 but i think any clio with seat airbags are roughly the same set up.
 
C

Clio_Craig

ok brilliant that should be a great help wen i can see the pics, they dont come up at work, will let u no how it goes:D
 
the air bag thing was a school boy error when i fitted mine . they didnt go off but i didnt know i had to disconnect the battery until i posted a them on here and was kindly told that i should have disconnected the battery . lol .
 
C

Clio_Craig

the seats look a treat black vinyl leather with silver cobra stitching and black 3 point detachable harneses
 
  14' Leon Cupra 280
Yeh, just put mine in on Saturday, then with new CG Lock is such an improvement. May put harnesses in at a later date mind, but spent enough this month.

Also got some £1.50 caps from B+Q, not sure what they designed for, but with a packet of blu-tak now cover the bolts and finish the look a bit better. The seat belt pre-tensioners needs covering somehow now.
 
C

Clio_Craig

nice one fella, well i brought to detachable harneses for mine so if i ever need any 1 in a the bk there is a quick release catch. im gonna fit mine saturday cant wait. are u happy with them? got any pics m8
 
  14' Leon Cupra 280
Yeh, very happy, shoulders now feel supported and just the overall position improved. I'll go and get a few pics.
 
C

Clio_Craig

thats wat i was hoping for cant wait to fit them, wat did u do about the airbags etc etc
 
  14' Leon Cupra 280
Will have to get some better pics over weekend unfortunately, but i just left the airbags alone for now as i don't mind a few more lights on. Will probably go to Maplins sometime though for the resistors.
 
C

Clio_Craig

cheers lads, gonna try and fit them 2nite, and will get some pics up
 
C

Clio_Craig

i no haz:( im sorry as soon as i pull on the drive after work, i will get some, so dont worry ur lil impatient ass lol ;)
 


Top