Monaco RS Clio 172
hello,
to cut a long story short the car has been missing and running like a proper pig.
a few months back it blew a plug, so I got a local firm to heli coil it, and replace the plugs and leads. however I have discovered they put bosch super plugs in, so I have just replaced them with the NGK platinums recommended on here from eBay (thanks guys).
upon removing the plenum, the plastic end of this sensor snapped inside it, so I have got that out but have no idea what sensor this is that I need to buy. here are some pictures I was wondering if any of you can help me:
it goes in this part on the drivers side at the top of the plenum (side of it):
here is what it looks like now off the car:
so I need to order one of these and hopefully that bit will be fixed.
I have however noticed a serious problem with the drivers side top engine mount. here is a picture of the gap there, about 10mm, and the bolt that appears to have completely snapped.
I need to know what parts I need, is this even the engine mount? the top part looks like something to do with the engine itself and the bolt closest to the front has a crack round it. any idea what I need to replace?
I did a search and found ktec uprated ones look the best/financially viable option, but are they all I need here as ren7oaks can fit them...
that pic above shows the bolt in the hole, but look at the gap where it connects below it.. appears to be snapped and part of it stuck in whatever that bolts onto.
this is the one closest to the front and you see the circle within the circle, that is the cracked bit.. is this part of the engine mount from ktec? the pics don't look like it..
here is finally how the bolt looks that came out and where it came from:
came from:
and the bolt after snapping:
I hope these pics are descriptive for some advice, I haven't been to any meets for a while and was hoping sash or anyone may have experienced this problem before, I rang ren7oaks after seeing you recommend it sash I just need to know which parts I need as they can't quote without a better description and I can't drive it like this so I have to tow it there.
I am hoping this is 100-200 pounds of work rather than another 500-600 as this car seems to like costing me that much.
any help much appreciated,
thanks.
to cut a long story short the car has been missing and running like a proper pig.
a few months back it blew a plug, so I got a local firm to heli coil it, and replace the plugs and leads. however I have discovered they put bosch super plugs in, so I have just replaced them with the NGK platinums recommended on here from eBay (thanks guys).
upon removing the plenum, the plastic end of this sensor snapped inside it, so I have got that out but have no idea what sensor this is that I need to buy. here are some pictures I was wondering if any of you can help me:
it goes in this part on the drivers side at the top of the plenum (side of it):
here is what it looks like now off the car:
so I need to order one of these and hopefully that bit will be fixed.
I have however noticed a serious problem with the drivers side top engine mount. here is a picture of the gap there, about 10mm, and the bolt that appears to have completely snapped.
I need to know what parts I need, is this even the engine mount? the top part looks like something to do with the engine itself and the bolt closest to the front has a crack round it. any idea what I need to replace?
I did a search and found ktec uprated ones look the best/financially viable option, but are they all I need here as ren7oaks can fit them...
that pic above shows the bolt in the hole, but look at the gap where it connects below it.. appears to be snapped and part of it stuck in whatever that bolts onto.
this is the one closest to the front and you see the circle within the circle, that is the cracked bit.. is this part of the engine mount from ktec? the pics don't look like it..
here is finally how the bolt looks that came out and where it came from:
came from:
and the bolt after snapping:
I hope these pics are descriptive for some advice, I haven't been to any meets for a while and was hoping sash or anyone may have experienced this problem before, I rang ren7oaks after seeing you recommend it sash I just need to know which parts I need as they can't quote without a better description and I can't drive it like this so I have to tow it there.
I am hoping this is 100-200 pounds of work rather than another 500-600 as this car seems to like costing me that much.
any help much appreciated,
thanks.