Standard 182 Airbox cold feeds?

[DUBS73P]

Just received my standard 182 airbox, I've taken the pipercross induction off and I can only see 1 cold air feed next to the battery, but the box has a second hole on the bottom, is there a cold feed missing? Or am I being special lol

 

[jamievt]

its where the accoustic valve wouldve connected to its not an important part most people remove them and plug them or use as a second feed

 

[DUBS73P]

Ok cool, so I take it because there's no hose or bung in the second hole, it's sucking in the hot air just like my old filter at the moment?

 

[jamievt]

if its right by your engine then yes.. haha i had same issue when i got standard intake to replace my k&n

 

[DUBS73P]

Where can I get the plug to fill it? Or should I just get some 70mm ducting and run a second feed to the grill?

 

[jamievt]

whichever is best for you dont think makes difference either way i just made a template out of some pvc plastic and siliconed it on took about 5 mins

 

[DaveDreads]

You do have a hose missing if you're referring to the one on the underside of the box.

It's a shorter hose and just sits in the metal bracket next to the battery,
the one on the side of the box is the one that connects to the acoustic valve.

 

[DUBS73P]

So I dont even have the main CAF?
Just the one that runs past the battery to the acoustic valve, which doesn't open until 3k revs iirc?

So really, I do need to run the main feed

Fml lol

 

[DaveDreads]

The main feed is the one in the side of the box, in front of the battery, that connects to the acoustic valve.

The one from underneath is a secondary feed that connects to nothing,
it just sit under the main feed and gets it's air from the front grill.

Just get some CAF ducting and make your own.