I've got a 2003 Renault Clio Dynamique 1.2 in black and wanted the loudest stereo I could fit within budget,
This is a list of the equipment currently in my car:
Kenwood - KDC BT61U headunit
3 set of HQ RCA's from Ebay
Autoleads level controller (for bass)
2 pairs of Infinity Kappa 5.25" coaxials
JBL 14001 bass amp
JBL 1004 4 channel amp
2 Ascendant Audio Chaos 12's
I had already installed a basic setup before with an Edge double 12 active box and the upgraded door speakers with a smaller Sony amp so changing it up was made slightly easier...
Some pictures....
Boot before the big upgrade...
To power the install properly I needed extra batteries so I took out the spare wheel and mounted them down there...
I got 2 of these batteries and made a cage for them...
This what the actual car looks like...it has tints all round so nobody can see in at all...
This was the box being made with just 4 sides in the clamps to let the glue set
Drilling pilot holes and screwing in the TurboDrive screws
Basic box in my hallway with a size 10 shoe inside lol
My dad and I put the box in the boot to see if fits with the boot shut and left enough space for the lid....The rear wiper and motor was removed for extra space...
Box put together without the port in place as the wood hadn't been cut yet
Holes for the subs were cut out with the jigsaw not perfect but close enough..
Placed subs in the box to see what it looked like..
Then put it in the car for a test fit...
It fit perfectly so I got out the power sander and made all the edges smooth including the port then painted it black in the kitchen LOL
Finished for now...
In the car from my seat...
Just incase any of you were unsure of the wiring I used, I used 70mm welding cable for positive and negative and upgraded the wiring from the alt to the battery too...
This is a list of the equipment currently in my car:
Kenwood - KDC BT61U headunit
3 set of HQ RCA's from Ebay
Autoleads level controller (for bass)
2 pairs of Infinity Kappa 5.25" coaxials
JBL 14001 bass amp
JBL 1004 4 channel amp
2 Ascendant Audio Chaos 12's
I had already installed a basic setup before with an Edge double 12 active box and the upgraded door speakers with a smaller Sony amp so changing it up was made slightly easier...
Some pictures....
Boot before the big upgrade...
To power the install properly I needed extra batteries so I took out the spare wheel and mounted them down there...
I got 2 of these batteries and made a cage for them...
This what the actual car looks like...it has tints all round so nobody can see in at all...
This was the box being made with just 4 sides in the clamps to let the glue set
Drilling pilot holes and screwing in the TurboDrive screws
Basic box in my hallway with a size 10 shoe inside lol
My dad and I put the box in the boot to see if fits with the boot shut and left enough space for the lid....The rear wiper and motor was removed for extra space...
Box put together without the port in place as the wood hadn't been cut yet
Holes for the subs were cut out with the jigsaw not perfect but close enough..
Placed subs in the box to see what it looked like..
Then put it in the car for a test fit...
It fit perfectly so I got out the power sander and made all the edges smooth including the port then painted it black in the kitchen LOL
Finished for now...
In the car from my seat...
Just incase any of you were unsure of the wiring I used, I used 70mm welding cable for positive and negative and upgraded the wiring from the alt to the battery too...