ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Stripped hub nut help needed
- Thread starter con1981
- Start date
Cutting disc into it both sides and chisel it off. Replace the driveshaft too. And the wheel bearing that's knackered.
Dr HMS Derv Destroyer
ClioSport Club Member
MK1DTi/vivaro/corsa
Cut it off and get another stub axle
incy-spider
ClioSport Club Member
Unbolt the stub axel off the beam and get it in a vice then with a large drift and hammer beat the flock out ort!!
What's a drift? Sorry pretty new at this
incy-spider
ClioSport Club Member
Like a big punch, rounded chisel 
Like a big punch, rounded chisel
Cheers bud got ya! :thumbup:
You'll be lucky if you can unbolt the stub axle without holding the bolts from the disc side.
Yes I think you'll have stripped the threads on the stub axle.
Yes I think you'll have stripped the threads on the stub axle.
That's why the bearing has failed.
Yep my thoughts as well. Will order from Renault replacement deflector washers.
You don't where I can get a replacement stub axel from?
Renault sell them I think.
Cheers bud I'll give them a ring in the morning only second hand ones I can find will take a week to deliver
Rang renault and they wanted 170 with vat to add per side. I've managed to get some second hand for 30.
One question what size are the torx heads that hold the stub axle in place?
Similar threads
