ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Super Resin Polish
- Thread starter Lee-182
- Start date
Also, the clay should be leaving your paint silky smooth. Try harder next time
Maybe he can feel the swirls? hence a little rough?
More lube and more back and forth action.
HAHAHAHA! <3
Porsche Boxster987S
Maybe he can feel the swirls? hence a little rough?
More lube and more back and forth action.
seriously????
if youre saying youve clayed it but its still not as smooth as glass then you have either used too much lubricant , not gave the area being worked on enough passes , or you need a stronger clay. Claying is the worst bit of detailing imo but something which if done , should be done correctly.
Porsche Boxster987S
if you let the clay or paint dry up (not enough lubricant) you can marr the paint. Claying also causes swirls. So the polishes stages and those after should be followed when finished claying to get the best finish/look from the paint
VIICarCare
ClioSport Club Member
255, 230, 172, R26
how long did you work the clay on each panel? Small area's at a time. Try again, if its still bad then move up to a slightly more agressive clay?
never had this prob before :S
never had this prob before :S
VIICarCare
ClioSport Club Member
255, 230, 172, R26
^ OOOPS, didnt read the bit about tar!
Clay is designed to remove contaminants that are invisible to the eye. . . last time I checked, I could see tar spots
Just because it removes tar, does not mean that you should therefore just use it to remove that and that only. Tardis or AG ITR is to be used to loosen and remove 75% or more of the tar. The clay should then be used to remove anything that could still be there.
Who ever said "you can feel swirls" has obviously not had their morning coffee!!!!
SRP will fill swirls as it is a filler polish. If you paint surface is rough, you either haven't clayed it properly, or you have sap/over spray, meaning your clay bar needs to be tougher.
Paul, is there an echo in here at the moment or is it just me?
Hai x
Just because it removes tar, does not mean that you should therefore just use it to remove that and that only. Tardis or AG ITR is to be used to loosen and remove 75% or more of the tar. The clay should then be used to remove anything that could still be there.
Who ever said "you can feel swirls" has obviously not had their morning coffee!!!!
SRP will fill swirls as it is a filler polish. If you paint surface is rough, you either haven't clayed it properly, or you have sap/over spray, meaning your clay bar needs to be tougher.
Paul, is there an echo in here at the moment or is it just me?
Hai x
Last edited:
Yeah I can feel my swirls..they shocking.
Love it Paul!
