Re: Djw Designs dedicated track toy project
Keeping the ph2 dash but as its going to be a ph1 loom its technically another dash conversion!
Keeping the ph2 dash but as its going to be a ph1 loom its technically another dash conversion!
ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Team Djw's Dedicated Track Toy Project: Update Post 167. New pics page 6
Re: Djw Designs dedicated track toy project
We've currently got a total of 11 cars between us. Thats just far too many even using man maths!
No it doesn't unfortunately but we have been given a loan of a petrol genny thats enough to run a couple of lights and a grinder, what more do you need?!
We've currently got a total of 11 cars between us. Thats just far too many even using man maths!
No it doesn't unfortunately but we have been given a loan of a petrol genny thats enough to run a couple of lights and a grinder, what more do you need?!
Re: Djw Designs dedicated track toy project
Went down for a couple of hours myself this afternoon on my last day of AL and sort of faffed about for the first hour doing little things here and there and then decided to get stuck into getting the interior looms and ready to go into the caged shell.
Unfortunately my iphone did its usual trick of switching off when its cold outside so I barely managed any pics but here's the 3 it did before dying (with 40% battery)
On the trip down I thought it was one of the worst stereos I'd ever heard, turns out I was right.
It got a fair bit heavier than this and was around minus 2, thankfully I was at least out of the wind and busy so didn't feel cold. Need to get a couple of lights though, was working by the light of the Cliosport torch that came in the renewal pack!
And the only one that shows any progress at all!
However, the brief rundown is the lights loom is removed from the front, both rear looms are fully removed and the main dash loom is completely away from the dash and is only held in by the seat wiring. Was going to snip it but wanting the handbrake wire out of it and decided if we're doing the rest of it right then may as well do it all right!
Went down for a couple of hours myself this afternoon on my last day of AL and sort of faffed about for the first hour doing little things here and there and then decided to get stuck into getting the interior looms and ready to go into the caged shell.
Unfortunately my iphone did its usual trick of switching off when its cold outside so I barely managed any pics but here's the 3 it did before dying (with 40% battery)
On the trip down I thought it was one of the worst stereos I'd ever heard, turns out I was right.
It got a fair bit heavier than this and was around minus 2, thankfully I was at least out of the wind and busy so didn't feel cold. Need to get a couple of lights though, was working by the light of the Cliosport torch that came in the renewal pack!
And the only one that shows any progress at all!
However, the brief rundown is the lights loom is removed from the front, both rear looms are fully removed and the main dash loom is completely away from the dash and is only held in by the seat wiring. Was going to snip it but wanting the handbrake wire out of it and decided if we're doing the rest of it right then may as well do it all right!
Re: Djw Designs dedicated track toy project
Mostly clios too. But 100% all Reno.
and yes we know. :\
Mostly clios too. But 100% all Reno.
and yes we know. :\
Re: Djw Designs dedicated track toy project
Update time.
Popped down the garage myself as Johns at work and I've got the week off to do other work.
This is how it started today.
Started by getting the front up on some stands, as high as I could to allow as much room to work around it.
Dropped the gearbox oil and engine oil
Then set to work on the drive train on the pass side, hub, wishbone, shaft, shock and spring all removed ready for new bushes, bearings etc etc
Working on the pass side i also removed the wing, skirt and arch liner.
And finished the day by dropping the coolant and removing the rad.
Tomorrow I'll do the same to the drivers side then move onto the next stage.
As always C+C welcome.
Update time.
Popped down the garage myself as Johns at work and I've got the week off to do other work.
This is how it started today.
Started by getting the front up on some stands, as high as I could to allow as much room to work around it.
Dropped the gearbox oil and engine oil
Then set to work on the drive train on the pass side, hub, wishbone, shaft, shock and spring all removed ready for new bushes, bearings etc etc
Working on the pass side i also removed the wing, skirt and arch liner.
And finished the day by dropping the coolant and removing the rad.
Tomorrow I'll do the same to the drivers side then move onto the next stage.
As always C+C welcome.
Re: Djw Designs dedicated track toy project
Run out of tubs for the coolant then?!
Good work son
wish I was there freezing my balls off too!
Run out of tubs for the coolant then?!
Good work son
wish I was there freezing my balls off too!
Ian_R
ClioSport Club Member
Mk3 Megane 250
Re: Djw Designs dedicated track toy project
Ha Ha - as long as you have plenty of cable ties everything will be fine!
Gaz85
ClioSport Club Member
330e, golf r, EP3 s4
Re: Djw Designs dedicated track toy project
I was going to comment but then I thought I best not on the mess he made!
Run out of tubs for the coolant then?!
Good work son
I was going to comment but then I thought I best not on the mess he made!
Re: Djw Designs dedicated track toy project
Such a mucky pup. Should've got it in a bucket and poured it on the weeds.
Such a mucky pup. Should've got it in a bucket and poured it on the weeds.
Rob
ClioSport Moderator
Re: Djw Designs dedicated track toy project
You guys are f**king batshit. I love it though.
I'd love that black ph1, I really want a tidy up project. Finance says no until Novemeber though.
You guys are f**king batshit. I love it though.
I'd love that black ph1, I really want a tidy up project. Finance says no until Novemeber though.
Gaz85
ClioSport Club Member
330e, golf r, EP3 s4
Re: Djw Designs dedicated track toy project
This would be a bit more than a tidy upper tbh. I wouldn't put the money into it that it needs, just wouldn't be worth it.
You guys are f**king bats**t. I love it though.
I'd love that black ph1, I really want a tidy up project. Finance says no until Novemeber though.
This would be a bit more than a tidy upper tbh. I wouldn't put the money into it that it needs, just wouldn't be worth it.
Rob
ClioSport Moderator
Re: Djw Designs dedicated track toy project
Oh fair play, that's OK then as it seems a shame to kill a black one for no reason.
How many ph1 172's do you currently own between you?
Oh fair play, that's OK then as it seems a shame to kill a black one for no reason.
How many ph1 172's do you currently own between you?
Re: Djw Designs dedicated track toy project
5. But the 182 is becoming one so you could argue 6.
5. But the 182 is becoming one so you could argue 6.
Poopensharten
ClioSport Club Member
Golf R
Re: Djw Designs dedicated track toy project
I want my exclusive back, lol
I want my exclusive back, lol
Gaz85
ClioSport Club Member
330e, golf r, EP3 s4
Re: Djw Designs dedicated track toy project
Buy it back from Dave
I want my exclusive back, lol
Buy it back from Dave
Re: Djw Designs dedicated track toy project
You can have it. Been a total mare tbh.
I want my exclusive back, lol
You can have it. Been a total mare tbh.
Poopensharten
ClioSport Club Member
Golf R
Re: Djw Designs dedicated track toy project
Aw aye, whats wrong with it?
Aw aye, whats wrong with it?
Poopensharten
ClioSport Club Member
Golf R
Re: Djw Designs dedicated track toy project
Bought one for £850 at the weekend, needs a couple of bits but seems a good, honest one.
Bought one for £850 at the weekend, needs a couple of bits but seems a good, honest one.
Re: Djw Designs dedicated track toy project
Ach every car has issues, I'm sure it wasn't meant with hard feelings. My post was certainly meant as a joke. As if we'd supply the petrol, we've only got the money for the swan vestas.
Ach every car has issues, I'm sure it wasn't meant with hard feelings. My post was certainly meant as a joke. As if we'd supply the petrol, we've only got the money for the swan vestas.
Re: Djw Designs dedicated track toy project
So anyway back to the project. Our harnesses arrived
because priorities.
So anyway back to the project. Our harnesses arrived
because priorities.
Poopensharten
ClioSport Club Member
Golf R
Re: Djw Designs dedicated track toy project
Re: Djw Designs dedicated track toy project
They did a damn good job of holding me onto the sofa last night. Lorna didn't even bat an eyelid, almost like she expects her 30 year old husband to try on some harnesses in the living room. I may have issues.
They did a damn good job of holding me onto the sofa last night. Lorna didn't even bat an eyelid, almost like she expects her 30 year old husband to try on some harnesses in the living room. I may have issues.
Gaz85
ClioSport Club Member
330e, golf r, EP3 s4
Re: Djw Designs dedicated track toy project
I like living in denial. It's warm.
I like living in denial. It's warm.
Re: Djw Designs dedicated track toy project
Thats pretty normal! I have a bucket seat in my lounge that I sit in regularly
Thats pretty normal! I have a bucket seat in my lounge that I sit in regularly
172 cup, Impreza P1
Re: Djw Designs dedicated track toy project
Same here, I have an aston martin DB7 chair that I use as a lazy boy.
Good progress guys!
Thats pretty normal! I have a bucket seat in my lounge that I sit in regularly
Same here, I have an aston martin DB7 chair that I use as a lazy boy.
Good progress guys!
Re: Djw Designs dedicated track toy project
Yay, I'm normal. For a car geek who spends too much time on a forum and too much time and money pissing about with old French tat.
Yay, I'm normal. For a car geek who spends too much time on a forum and too much time and money pissing about with old French tat.
Re: Djw Designs dedicated track toy project
So that was a good Friday. We both managed to be at the car at the same time and Gaz85 even came down to help out. And get a fingernail trimmed....
Started off like this
but then we noticed this
Subframe is a bit banana'd. Pain but we do have another so it could've been worse.
And this is why you should always fit springs that are actually intended for your car kids, basically they may as well have been chopped for how 'safe' they were
A very quick tidy up after a short time
Engine loom, alternator and a few other things removed
Not technically attached anymore
not much left here either
and the subframe came off nice and easily. Looks like its been off before to be painted. Forgot to get a pic of the rotten chassis leg
Bit annoyed that someone has diy decatted it, we were gonna weigh that in!
1 of the 15465432154 piles of bits we have
Engine and box out
Refitting things to the caged one
Highlighting how minging mine is at the moment
Axle off
Interior 99% stripped of what we need now
And a few other things done like the aux belt set up remove, petrol tank drained etc etc
Cheers
JohnDave
So that was a good Friday. We both managed to be at the car at the same time and Gaz85 even came down to help out. And get a fingernail trimmed....
Started off like this
but then we noticed this
Subframe is a bit banana'd. Pain but we do have another so it could've been worse.
And this is why you should always fit springs that are actually intended for your car kids, basically they may as well have been chopped for how 'safe' they were
A very quick tidy up after a short time
Engine loom, alternator and a few other things removed
Not technically attached anymore
not much left here either
and the subframe came off nice and easily. Looks like its been off before to be painted. Forgot to get a pic of the rotten chassis leg
Bit annoyed that someone has diy decatted it, we were gonna weigh that in!
1 of the 15465432154 piles of bits we have
Engine and box out
Refitting things to the caged one
Highlighting how minging mine is at the moment
Axle off
Interior 99% stripped of what we need now
And a few other things done like the aux belt set up remove, petrol tank drained etc etc
Cheers
JohnDave
Re: Djw Designs dedicated track toy project
Great progress guys
Great progress guys
Re: Djw Designs dedicated track toy project
Good read so far guys
Good read so far guys
Similar threads
