Treating my self to one of these

[paul]

After much thought, i think ill be keeping the little clio for a while yet :approve: going to be getting one of these pretty soon

this has a decat but im not having one of these!

Get rather a good rep (from reading past post) not to loud and 100.00 odd cheaper than the yozza and i do like the fact that it has twin boxes like the orginal just fills the holes that little bit better! which is needed

Woop Woop all be spending hours with my autosol!

few pics for the w/end after a coat of srp and egp under there! :approve:

Brace your self for the abuse Paul hehe!

+ point is http://www.millteksport.com/?gclid=CJXl0KWF75UCFSTmlAodAwZ5fA fitting place is only up the road for me!

 

[Russ_16v]

CLEAN! lol

 

[Craig]

too clean for my liking. i want a miltek but im getting H&Rs instead

 

[paul]

cant wait to polish up the zaust up to a mirror finish! haha :approve:

 

[Christopher]

Is that a Milltek?

Good choice!!

 

[Alan]

Milltek aye..as long as its no a deadflame..

 

[paul]

Yes Chris! i wont be having a decat like you! but i think ill be much happier with the finish from this exhaust then keep rubbing down / painting the standard one!

I know you think im making the right choice :approve: and it has a nice sound to it! (not to loud) but you know its there)

 

[paul]

ive had a blueflame before and wasnt impressed (took them all day to fit the bloody thing, and even then they said they had lots of problems aligning the boxes! never had any problems after that! but i guess you get what you pay for!

 

[Christopher]

The Milltek's a great system.

I'm having my centre box removed at some point... it's met a few speedbumps in it's time and has recently started to rattle.

Ahh well, a bit more nosie will be welcome!

 

[paul]

lol! yours has been on a fair bit of time and you do a lot more miles than me! mine will be spent longer being polished then getting hot if im honest! lol

 

[paul]

one question please Chris! will i be able to polish up the face of the box (the bit that the pipe is welded on to) looks like it sprayed silver like a lot of zause are?! Im guessing with it being s/s that shouldnt be a problem! ?

 

[paul]

should polish up well!

 

[Christopher]

one question please Chris! will i be able to polish up the face of the box (the bit that the pipe is welded on to) looks like it sprayed silver like a lot of zause are?! Im guessing with it being s/s that shouldnt be a problem! ?

Nope, it's not like that when you get it.

It's all polished stainless, even the bits you're talking about.

 

[paul]

oooh great thanks! ill be happy polishing then! i hate it when they hide all there welds with spray! its just easier for them! its its more like the one on the picture above ill be happy!

 

[paul]

thanks kissifer!

 

[paul]

i wonder it i could ask them to leave one of the boxes off (the middle box) Just a thought?!!

 

[Christophe]

nice

 

[Christopher]

i wonder it i could ask them to leave one of the boxes off (the middle box) Just a thought?!!

I doubt it. They're all pre-fabricated.

JP Exhausts (Yozzasport fabricators) are removing my centre box for £60. It's just awkward for me to get over there as they only work Monday to Friday. :dapprove:

 

[paul]

^^ ive emailed milltek but there a bit slow at getting back to me! i guess its as your is so low! LOL! id be happy with just the standard set up tbh!

 

[Timmay]

very nice indeed paul

 

[Si]

schweet. good cleaning bud.

 

[paul]

thanks all! will let you know when it finally goes on!

 

[Christopher]

If you're fitting it yourself, Paul... remember that factory OE systems are in one single piece.

It'll need cutting after the beam to get it out without removing the bumper.

 

[paul]

i plan to get it fitted by there fitting place (as its only up the road from me) ive asked for some discount lol! but they havent got back to me yet?! Obviously arent in the need of my 400.00 lol! thanks though mate! i learnt a bit from having my old blueflame fitted! what a nightmare that was!

 

[Christopher]

Blueflame/Mongoose... oh dear.

 

[paul]

lol at the time everyone raved about them! it wasnt good that i drove all the way up there! (i know i should have poped in for a cupa) lol and it took them all day to fit it! which was a bit of a joke! bearing in mind they said it would take 2 hours which is all it should do if you know what your doing! imo!!!!

 

[MikeyK18]

nice job paul, just noticed, is that overspray on the underbody? lol

tut tut lol

 

[paul]

overspray?! :S