What have you done to your car today ???

[Anakin]

By giving it a watch?

that's a speedy watch, that just makes me faster ;P
I used it for scale in the photo

 

[gez 172]

I have my MOT due in the next couple of weeks - so cracking on with some jobs on the Disco 3.
The rear underside was looking a little scabby. So I removed the spare wheel and tackled the underside with a wire wheel. It’s not the best of jobs, but I’m happy with what I achieved within the time I had. Hamerite rust converter silver and satin black was used.

I don’t think it’s too shabby for a 15 year old car that’s been used in every season on and off road.

I didn’t fancy spraying the whole underside in a waxoil just yet.

I have a new spare wheel winch to go on tomorrow and then the spare wheel back on.

 

[H.Maxim]

In the last week, cambelt/aux & dephaser done, along with a service.
Flew through the MOT with just a couple of advisories!

 

[Daz...]

Replaced the drivers side handbrake cable, fitted brass bushes to the bottom of the gearstick, and slapped some sealant on the exhaust.

 

[G. Brzęczyszczykiewicz]

Took mine to a carwash so the birds that keep covering it in s**t have something shiny to aim for tomorrow morning 🙄

 

[Daz...]

Oil + filter, air filter, pollen filter and plugs all changed this morning.

It's too hot outside for messing around with cars 😅

 

[Matt e]

yesterday had a few bits done

cambelt
waterpump
aux belt
rear axle bushes
decat removed/sports cat fitted
aircon reinstalled

 

[E30kev]

Finally passed its mot this week 😎

 

[Jossman]

Fitted some brake ducts and changed expansion tank, ready for trackday at Brands on Monday 👍🏻

 

[Anakin]

Took out the the 6 year old Bosch spark plugs and put in some OEM NGK's. I'm convinced its running smoother

 

[Mclarenfung]

getting rdyoriginal block going to insert the new forged piston and rod

 

[Anakin]

Put some new seats in

 

[Mclarenfung]

following a mk3 on my mk2 today

 

[PP200t]

had my new steering wheel arrive just to fit it. and fitted new tyres and wheels to my car.

What wheels are those? Mazda? Looks good.

 

[PP200t]

Fitted a new pollen filter in.

 

[karlos0891]

What wheels are those? Mazda? Looks good.

they are nissan pulsar 18 inch alloys

 

[Clio_fool]

Did an oil change on the 1.2. Never doing it again, stupid place for an oil filter and it was stupidly over tight. 😡

 

[DomP182]

Insured the flamer - £140!! Bargain, then went to tax it - already taxed, not a bargain!! This means when I tried to SORN it in at the end of last year it obviously didn't process. 😭

 

[Clio_fool]

Insured the flamer - £140!! Bargain, then went to tax it - already taxed, not a bargain!! This means when I tried to SORN it in at the end of last year it obviously didn't process. 😭

My insurance ran out just after my gearbox imploded so I didn't renew while it was broken. 2 months later I got a letter saying if I didn't sorn it I'd get a fine. I should have done that to start with but didn't expect it to be off the road for so long.

 

[Anakin]

Did a powerflex upper engine mount today, oil change yesterday.

 

[Mclarenfung]

clio not love me

 

[VenomUK]

Our first outing trailering the Clio today up to see Mick at diamond motors.



Great bloke, helpful and friendly. What Mick doesn’t know about these cars it isn’t worth knowing!

Building confidence towing now to crack on with the Clio and get it ready for Germany in 4 weeks time!!

 

[Mclarenfung]

replaced from my storage

 

[Mclarenfung]

fix the bumper

 

[Clio_fool]

fix the bumper

No damage to the rear quarter panel then? That was lucky.

 

[Mclarenfung]

No damage to the rear quarter panel then? That was lucky.

a little bit need to fix cox the hitter no money pay me
so he call police


..then wait for insurance to hit him 😀😃

 

[karlos0891]

added a bumper protector to my new bumper and added a engine mount insert to see what it does lol plan to get the dog bone mount done aswell at some point next weekend is coilovers

 

[Simon1975]

Broke 1 of them.

 

[PP200t]

added a bumper protector to my new bumper and added a engine mount insert to see what it does lol plan to get the dog bone mount done aswell at some point next weekend is coilovers

let me know how the insert and dog bone is please, not sure mine needs it but have changed the dogmount on my other Clio’s and know how much improvement they make, so eager to do mine. Just wish it was cheaper like previous RS models.

 

[karlos0891]

yeah will do. i did hope the dog bone would of been cheaper but its machined too not just bushes being put in.

 

[PP200t]

I read on somewhere (can’t find it now!) but there is a cheaper version somewhere. Need to find it! Ha. Think mine needs changing as in race mode it rocks a bit on gear changes.

 

[PP200t]

Sprayed my tips black. Like the black and they look like that after a while anyway. (Excuse the dirty car)

 

[karlos0891]

they do look good black. i plan on black difusser with getting my tips redone red again lol

 

[PP200t]

they do look good black. i plan on black difusser with getting my tips redone red again lol

Thank you, they were pitted and not shiny enough for long so figured it would work. I really like it. Black diffuser would look awesome on your car tbh.

 

[Mclarenfung]

just arrived and another catcam haha

 

[Mclarenfung]

oversize 0.3mm piston
confirming clearance and honing

 

[MalcolmScotland]

Ripped the padding off the kids’ booster seats. Think with the weight reduction we’re on for a record time school run.

 

[Big Toe]

Ripped the padding off the kids’ booster seats. Think with the weight reduction we’re on piles.

Corrected your spelling mistake

 

[MalcolmScotland]

It’s fine because we are only 3:35 from school now 🤪

 

[karlos0891]

fitted air horns as the factory one is useless lol. also fitted new rear brakes and put her on b14 coil overs got to let them settle but done at renault performance settings. may adjust as needed in a few weeks