Wheel bolts for ET 35 wheels

[richardspeed10]

After a little advice just picked up some pro race 1.2's 15inch ET 35 after a little research I see you can't use the standard bolts. Seen a few sets on eBay but I'm not 100% sure on what to buy, please correct me if I'm wrong M12 1.5 34/35/36mm long. Any links would be helpful

 

[Djw John]

Why can't you use standard bolts? First I've ever heard of it!

 

[richardspeed10]

Honestly?? There's a few posted on here saying if you go for a lager offset you need longer bolts.

 

[imprezaworks]

Lol no mate. That's when using spacers.

Standard bolts are fine

 

[Djw John]

Yeah, that's nowt to do with offset, all to do with spacers.

Edited to add, I've run et35 wheels on the same car with the same bolts as et4* wheels.

The offset simply refers to where the bolts sit in relation to the width of the wheel.

 

[richardspeed10]

Thanks lads much appreciated

 

[Jekyll]

The wheel groove where the bolts go is still the same depth from there to the hub. It's the surround area that's enlarged.

The bore is the standard length with a 60 degree taper to take the standard wheel bolts.

They'll all be the same across the board, it's the surrounding area that will be increased, not the bolts groove itself.