Which Wheel Sealent

[Lee-182]

Chemical Guys Wheel Guard

It’s simply science to understand that friction creates static! Wheel Guard uses CG-specific lubricating agents bonded with acrylic crystalline and fluorocarbon polymer fluids to deliver a product that glides on like butter reducing friction and delivering an Ionic Anti Static product that repel brake dust, dirt, and fallout better then any product

Poorboy’s Wheel Sealant

Poorboy’s Wheel Sealant provides a clear, shiny and protective coating that will block out the dirt and pollution. You apply it like you would any wax or sealant, buffing to produce a shine and then the dirt and dust sit on this coating unable to break through it. It also means that your wheels will be easier to clean next time.

 

[Justin]

I've got the pink one, think its poor boys.. And its great!

 

[DanD182]

FK1000P or Poorboys.

Yes justin you have the poorboys one, i have that also and it's wicked stuff.

 

[Beef-Mc]

Agree with the poorboys.

 

[Justin]

FK1000P or Poorboys.

Yes justin you have the poorboys one, i have that also and it's wicked stuff.

Smells great too!

 

[DanFreemanPhoto]

PBWS is great! I would recommend it

 

[Mesa]

FK1000P (recently promoted over Collinite 746) - use it on the paint too.

 

[Lee-182]

Poorboys it is then, thanks chaps

 

[Ads_172]

I'm a poorboys fan - great stuff. Consensus seems to be there's not to choose between PB and CG WheelGuard though.

 

[pritchard182]

poorboys get my vote

 

[Lee-182]

Ordered Poorboys today, So wheels will be off at the weekend and ill get a few layers on.

 

[DanD182]

Ordered Poorboys today, So wheels will be off at the weekend and ill get a few layers on.

Make sure you have some old clay, clay the wheels polish and seal.

That will give you the best result if your takin the wheels off hehehe.

 

[DanD182]

Smells great too!

I can't put my finger on what it smells like though, but yes i agree smells yummy hehe.

 

[RussZS]

The Finish Kare 1000P Paste Sealant will outlast the Poorboys.

You should also look at Optimum Opti Seal, which is a wipe on product (no need to buff), which again will outlast the Poorboys.

Between the Poorboys and CG, the Poorboys is a bit nicer, and easier to remove.

 

[DanD182]

The Finish Kare 1000P Paste Sealant will outlast the Poorboys.

You should also look at Optimum Opti Seal, which is a wipe on product (no need to buff), which again will outlast the Poorboys.

Between the Poorboys and CG, the Poorboys is a bit nicer, and easier to remove.

Can i get this opti seal from detailedobsession ?

I wanna give it a try as my mate wants me to clay his wheels and i was thinking of trying summat new.

 

[RussZS]

http://www.detailedobsession.com/catalog/product_info.php?manufacturers_id=12&products_id=170



Amazing on paint and plastics too

 

[RussZS]

Do you know Gareth? He will do 7.5% off if you ask nicely

 

[DanD182]

Do you know Gareth? He will do 7.5% off if you ask nicely

Yea i know gareth just never really looked for opti-seal before haha!

The guy is awsome and he does some immense products at a really good price aswell.

He has to be the only place where you can get most of the optimum product line!

 

[RussZS]

There's Motorgeek too, and Elite will be stocking them soon, but I get all of mine from Gareth as he's a legend

Try the shampoo too if you haven't already

 

[DanD182]

There's Motorgeek too, and Elite will be stocking them soon, but I get all of mine from Gareth as he's a legend

Try the shampoo too if you haven't already

I love the shampoo, i wanna get their detailer next.

I agree gareth is awsome and very helpful if advice is needed.

 

[RussZS]

Elite have had their delivery today, and will be added to the site later.

They have the US Gallon of the QD in, which dilutes 1:1 with water... which makes it a bargain...

 

[JD]

Russ you've mentioned the Opti stuff before, link me?

 

[RussZS]

Post 16 my man x

http://www.cliosport.net/forum/showpost.php?p=5654298&postcount=16

 

[RussZS]

Do some reading up on it on Autopia - the Yanks can't get enough of the stuff!

There are some great vids on YouTube too.

 

[JD]

Top man, cheers Russ.

 

[oz_clio]

Poorboys is great, and smells awesome!

 

[Lee-182]

Poorboys was delivered today, as well as my trolly jack so off with the wheels this weekend and on with some layers, Says it needs 6 layers i think on the tub to reapel dust

 

[JD]

Rubbish. One is fine, two is great, three is OCD

 

[RussZS]

SIX layers?? LOL

As JD says, 3 is what you want.

SmartWax RimWax is awesome too...

http://www.i4detailing.co.uk/acatalog/Smartwax_RimWax_1.html

 

[JD]

No no no, Russ, it's awful stuff if it's the same thing that I bought years ago. It seems to have polishing abilities as well and we all know you can't do both!

 

[DanD182]

Poorboys was delivered today, as well as my trolly jack so off with the wheels this weekend and on with some layers, Says it needs 6 layers i think on the tub to reapel dust

What tub did you get delivered cos on my tub it says for best affect use 3 layers.

I will be investing in FK1000P and opti seal in the next few weeks, gonna put the opti-seal on drivers side wheel and FK1000p on the passenger side.

I wonder which will perform the best!

 

[BRUN]

my PB WS lasted months on my refurbed wheels

 

[Lee-182]

I dont know where i got 6 from lol, yeah says 3. I done all my 4 wheels in 4 layers. used quite alot of sealent tho.

Hope it works and are easy to clean.

 

[JD]

Shouldn't be using too much mate, how much of the tub did you use?

 

[Lee-182]

just under half i think

 

[JD]

Waayyyy too much fella, massively over done it :S

 

[Lee-182]

oh well. should work better then

 

[JD]

Not really fella, pretty wasteful (not being a dick, just informing you ). Where are you based lad?

What you need, as with most sealents and waxes etc is a nice thin layer. Then topped up as many times as you see fit. By adding thick layers you will just be buffing off a whole load, thus reducing the lifetime of the pot

 

[Lee-182]

ok tar will know know for future.

East anglia, Why?

 

[JD]

Just wondered if there was someone around that could give you a hand and a few pointers when it comes to detailing lad

Anything you aren't sure on, post in here and I will help, along with quite a few others.