Wiring Diagrams needed

[WeeGad]

Need diagrams for the UHC and ECU from a 02 1.4 dynamic and also for a 00" mrk1 172

Or preferably if any one has a diagram on how i can wire up the 172 engine to an Omex 600 ecu and then into the standard UHC and ECU,if that makes any sense?

 

[edde]

Unfortunatly people who have the diagrams are unlikly to want to send them on there a bit of a private item.
Pm me your eamil address and i can send you a file showing the pin outs for the ECU on a Mk 1 172 along with other bits etc which you'll need to know.


Why don't you just take the eaysd and better route of usingh a whole phase 1 172 loos and forget the UCH its just a pain.

 

[16v_jon]

if you use the phase 1 interior loom you will have to change the dash, as the connectors for everything heaters, speakers, airbags, are different.
you need to take the wires you need from the ECU's loom and connect them to the OMEX the rest of the wires leave in the original ECU ones for the imobiliser etc.