Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I think et40 would work, however reality might prove me wrong! The only way to be sure is to either fit one or get the supplier to provide some exact measurements of the two wheels.
I'd want to know the distance from the hub mounting surface to the inner spokes on both offsets. All I can say...
Are these going on a 182? I've had Slipstreams before in et45 (same offset as the oe wheels). They fitted fine on the front, but wouldn't clear the calipers on the rear. 5mm spacers sorted it, but I wasn't happy with that solution so sold them on.
If I was going to buy them again (which I...
Ahh, forgot that problem happens on un-modded cars :o
I've put buckets and harnesses in and still have never found a definite answer on the resistor placement!
If you go somewhere good like Wizards of NOS I think they'll only let you leave with the lowest rated jets to start with. As for advice about how much it can take, they have a wealth of knowledge - I'd ask them. They were very helpful with me, but I didn't go through with having it fitted.
A friend of mine has recently bought a 2005 plate Clio Extreme and it appears to have a problem with the radio display screen at the top of the dash.
When the weather's warm the display becomes very faint and difficult to read. Has anyone heard of this before or know of a fix?
This is badly written, but it's the only thing I can find on the net at the moment -
http://www.200sxs13.nismo.org/turbo_conversation.html
Read the first question - "How can different size turbochargers running the same amount of boost produce different BHP results?"
Now relate this to...
Forgetting the turbo vs supercharger comparison - would a T3 and a T4 size turbo produce the same power on an engine of the same specification if they were running the same psi? I'm sure I've read something about this in Walker's workshop once...