Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
James, my adapator is now fitted and fully functional. The dash does not need removing as Ollie said above. The unit just slots in (the limited space) behind the headunit. It allows full function of the steering controls and on the head up display it displays the HU brand, in my case Sony...
check the brake fluid level, if it's low also check brake pads for ware.
Service light will be the connector under passenger seat, check this and tighten if needed. Wiggle the wires to see if the light comes on/goes off.
It's the one out of a 182 mate, so it's 'leather', not sure on colour I can check though. The clip broken is at the front but it can be secured with a little imagination. :)
It's yours for £5 posted tomorrow if you want it?
Then it's not the fuse, as they're both on the same one. It must be a local problem to that headlight. Have you checked the contacts within the lamp holder? Also try swapping lamps from drivers to passengers and back.
the ballast isn't within any seals, it's simply bolted to the bottom of the headlight. It's more likely that the moisture has damaged either the actual lamp itself or the ignitor/charger unit, both of which are within the rubber seal.
It's down behind the near side wheel, under the headlight area.
It's for EU directive on noise pollution. Removing it should give you a little more induction noise but could reduce low-down torque.
Yes I have a guys details, PM me and I'll pass them on :)
Think your title may have confused people as I first thought you meant a Focus/Fiesta ST sticker ;)
Yes I believe so mate. Just fit a 1.2 (or whatever) stalk and so long as the model didn't have auto wipers, yours should be disabled.
Disclaimer, I've never actually tried it and therefore will not be held responsible for wasting your time! :rasp: