Search results

As above really. Not sure what the cheapest place in the UK is? I know the German site has gone up in value now.

I'm sure I've seen someone on here have some for the rear. Where is the best/cheapest place for aero blades in 12" for the rear of a ph2.

Went to Witham today to meet @rs 1an @Ricardos and @nutnutwelshman for some pub lunch. Afterwards we found a small spot so we took some pics. Im sure the others have some too. As always, comments and criticism welcome :smile: More pics can be found here...

I'm sure I read on here a thread about it once but cannot find it now. I know theres a few different ones (tuner list, auditorium, etc) but what is the difference between them all and what is the best one to have? Do certain things only work on certain ones, ie: cd changer, tunepoints, etc...

Happened today while removing the hub to do a bearing change. Turned out the spline was seized in the front hub and was pulled out while the hub was removed. This is what I have. What's the deal here? How do I refit the rubber? Process to what's next? Thanks, Mark. Pic is taken by looking...

Went to this over this weekend and took some snaps. I thought I'd share them on here. Hope you enjoy :smile: Full album can be found here: https://www.flickr.com/photos/58003155@N07/albums/72157675432372284 Thanks for looking, Mark.

While at the North Weald meet i managed to get a few pics of the RB while the Spitfire was out. I had to be careful where i parked, so i just pulled up and took a quick few shots but i like them so i thought i'd share on here :smile:

Im going to paint my brakes soon as don't like the current rust/dirt. I have currently go silver rear ones and it looked good when i had the anthracite turinis but now i have white 2118's i feel it doesn't look as good. The white wheels will be staying so i feel that i need something that will...

I put these on the facebook page but I thought i'd share on here also :smile: The car was dirty (ish) and the weather was crap but i wanted to use the camera my missus had recently bought for me. Got a bit to learn as i havent used a DSLR in ages but it was good to shoot with one...

Thought I'd ask in here as well as browsing ebay. I also thought this section would be better as more people may have instrest in this section rather than the wanted section. 2nd hand or best place to look online? It'll be paired with a Nikon D3300. Thanks, Mark.

Spotted you going from Tesco at Hatfield heading towards Essendon/Hertford. Was around 3:45pm. Had a cliosport.net sticker in the rear window. Car looked nice.

Do people keep there own version? Im thinking of doing one. If i can, i do most of the work myself and sometimes i have help from a good friend who works for engine dynamics. But this is mostly DIY. This isnt a problem on here as i take photos of everything and i have receipts of all parts...

Took apart my clocks to paint the center. I must have knocked the needle upon doing so. All fitted but it doesn't read correctly. Tonight i filled up fully and drove 15 miles approx so it should be full, or just off. However whenever i turn on/off the ignition the needle keeps dropping further...

As the title suggests. As i was leaving work there was a nice sunset and having cleaned the car yesterday, i thought i'd take a few quick snaps :cool:

Can someone link me to the right ones? I'm sure I read that the 182ff were different? And can somebody clarify that these are the correct top mounts for 182ff also? It says fit a 182 but not a 2.0ltr sport! I'm prett sure I saw them linked on here, which is how I came across them, but I can't...

Has anyone used them on the 1*2 coilovers? I'm thinking of getting a set for my Gaz's.

I'm wanting to remove both my horns and go down to one. Does anybody know what DB the standard double ones are so I can look into a single one of the same DB. Better still, anybody got a link to a decent single horn?

I've only noticed this when I turn into work. It's a sharp left. Any other time and it's fine. However I jacked the car up yesterday and it does it whist there was no load on the wheel. It sounds like spokey dokies you used to have on your bike as a kid. (Or a playing card if you didn't have...

Ive planned to have the car aligned tomorrow but as some of you may know, i have a knocking rear somewhere. My question is: If i have the alignment done and then i need to adjust/remove my rear shocks, will this alter it? Vaguely remember reading the rear is fixed so this wont be an issue, but...

Its a loose, knocking noise and i dont know what it is or even where its coming from. Car has had new discs (genuine) with all new spacers correctly fitted and done up to the correct setting. 175nm. It has brand new Gaz "full" coilovers all round. I have fitted them fully, and i even removed...

What ones are needed for the replica spoilers? Unsure if the reps are the same as genuine ones but I do know my spoiler doesn't hit the roof once fully opened. Vaguely remember reading it was a BMW one?

Show me your stud and nut kits. I don't like having bolts, especially as I take my wheels off regularly. Its so much easier with studs, plus you can rest the wheels on the hubs easier once it's all loose. If you can, state the length of the studs and spacers size if your running them. Thanks...

I currently have the bass ports brake ducts and wanted to see what people have done with there's, both outside and inside. How have they got round the carbon cannister/horns and what have they done to cool the brakes.

I know theres loads of threads on this but nothing clairfies the answer im looking for. What am I doing wrong to get the light off. I've removed the cannister completely and remove the pipe from the inlet to the cannister. The inlet has a pipe going from the back to where the acoustic valve...

Few quick snaps of the RB at work.

Really like the look of these and have never seen the before. Kinda superturismo looking wheels. Comes in 15" but says they are for 2005 onwards/clio lll, but I thought that they was 5 stud, and the clio ll is 4 stud...

Can someone clarify the way it goes. I'm taking off my K-tec ones and putting standard ones back on. Pretty sure it's shock, then bearing, bottom cup, then sleeve, flat washer, shock nut, through turret and then top cup. Also what torque setting on the top nut. It's been a while since I...

Opposite where I work, there's a chap that owns a Skyline tuning company. He has a lock up on our farm with some cars stored there and sometimes we have some of he's customers turn up, so i thought I'd take a few pics. This one has a RB30 in it This thing is mental...

Noticed this place last year and wanted to get some pics here this year. We literally left CSF and these was taken within 10 mins of leaving, being just down the road from Blyton! Luckily the sun was out and the car was still clean :)

What's the deal to removing/replacing it? I've got a new mint one to fit, but never removed one before. Can anybody shed some light please? Ph2 182. Thanks, Mark.