Search results

How about doing scottish car show in july? More chance of having dry weather compared to PFC at knockhill in september!

So i should get rid of the shims then? Wouldn't the pads rattle about without them though? As there wouldn't be a surface for them to run on? God my saxo's were much simpler than this thing!

Is that the metal bits where the pad runs on? As above?

I had heard that, but mine only does it on one side, and when hot or cold. Iv done about 300-400 miles now and its not getting any better!

I bought mine from G 172 and filed down the ends so they would slide freely, as when I first received them, there was no chance of them fitting!

Ferodo ds2500's

Right after fitting new discs and pads to the front, my brakes are seriously squeling on the one side. its getting to the point where its so bad its f**king embarrasing in towns! The pads themselves move freely in the carrier, i have used copper grease in the sliders and on the backs of pads...

No no. You mean who has took them out? :p

Aye the pass side is gone and clicking away when on full lock. Quite a bit of play in it aswell. Which is why I was maybe just going to do both shafts to save draining and filling the gearbox twice, as the other cv boot has came off so I dont know how long it will last till it starts clicking...

My passenger side cv boot is gone (clicking away) but I have noticed that the cv boot on the drivers side has been off at some point (nice circular trail of cv joint grese everywhere lol) So I was thinking about just replacing both driveshafts at the same, save having to possibly drain and...

Thanks mate. Ill have to get this done whin I get some spare time!

Looks great. This is what I was planning to do, except paint the cover orange. What paint did you use for the inlet? High temp?

So its out next spring? :D Looks great! Will have to get my pre-order sorted for this. Any deals on anywhere?

Alright cheers guys. Ill try replacing the filter then. The master socket? As in the one downstairs? It has a phone line plugged into it, which goes up to the phone line connector box in my room. Which the phone and router are plugged into microfilter. Can that be fixed? or not?

Right turns out the other phone downstairs isn't connected to the phone line, (works wirelessly with the other phone) So the way it goes: Phone line socket in downstairs living room, phone line wire goes up to the phone line socket in my bedroom. Micro filter is connected to that phone line in...

Ok cheers. I got another micro filter with the new router i just got, so ill chuck that in and see if it works. Cheers

Ah! there is two phones in the house, so if put a microfilter into the other phone line, then I should be alright?

Aye think so. Is that the thing that you plug into the phone socket in the wall and then plug the router and phone line into that?

Right my internet keeps cutting off for about 10 seconds whenever someone uses the house phone. What could be causing this, and how can i stop it? Gets rather annoying tbh! And no, its not a dial up connection :p

This is the max for me, then I have to wash it!

Re: Inferno 182 Thanks man. Means a lot to me to hear that from the previous owner! I will be taking care, no need to worry about that. :D Ill offer it to you first then when I come to sell it. Which wont be anytime soon though! Unless I come into a large sum of money and can afford a megane...

Re: Inferno 182 Got it sprayed a while ago now, the colour match is perfect tbh. Really happy with how it turned out! Also winter is bad! :( Seems to be running a bit rich :S

Well stripped them this evening again, ground some more off the ends of the pads, and now it seems to only squel when using the brakes going slow. Might just leave it a while then, as they stop the car fine. Might have to do this if it still doesn't sort itself. Cheers.

Right so I recently fitted new brakes to the front, Brembo HC discs and ferodo Ds2500 pads. (first time iv had to grind down the ends of a pad to fit it, disappointed in the quality for the price of them!!) Anyway, I now think the front drivers caliper is binding. Drivers side sqeals a lot, and...

Thats good then. I really need to get myself on track next year at somepoint!

Soo how was the weather? It was dry up here all day! Makes a change.

Personally im not a fan, its very, 90s. But if you like them, then who cares what anyone else thinks?

If you let it get to the correct temperatures then it would be fine no? My dad does this with his "decent" car and his bike every winter and they have both been fine.

As said, they can be a bit crashy, but I dont mind them tbh. My car is not a "hardcore track weapon" so I dont feel the need to change dampers.. I have 50 profiles as well. Maybe its just the angle of the pic?

Lowered on 40mm apex springs