Search results

What are peoples using for toolboxes. I'm fed up of everything getting chucked in a box and not being able to find anything Something not too bulky that I can just chuck in the boot if the car Pics and links appreciated (nothing silly expensive) 🙂

Have had a Google but cant see any guides. Has anyone worked on one?

Just checked dialogys but there's like 12 different numbers so assuming differences between LHD/PH1/PH2 I'm after the cable and the latch bit (I know which part I need for the bonnet) For ph2 172 if anyone has recently purchased them I'm only interested in new parts Thanks for any help

What are peoples usual go to here? I used some cheap screw extractors(won't be doing that again) which sheered so I could no longer drill our the nipple Tried welding nuts on with no luck either

So usually I use the boot clamps in picture 1, but I have absolutely no clearance on my Megane 225 cv joints so need the most slimline clamps I can get. I had to use a metal cable tie type like pic 2 as its all I had to hand. So what clamps do you lot use and what would you recommend out of these

Any recommendations. Not sure weather to go with a worktop press or a full height one. What's everyone using? Need it to replace a swivel hub on my meg but would like to be able to do wheel bearings in future Love a few pics of setups if possible Thanks!

What standard mechs have people used? Don't want one that's gonna fail on a trackday and there's loads listed on ebay if anyones used one with no problems

Will I need to lock cams/crank to swap mine over? Old one is nackered and have a new one to go on Help appreciated

Think its a 1.4 manual. Anyone know the capacity? Iv just assumed it would be the same/similar as a 1*2? It's for a mate and couldn't see anything on Google about quantity Spec/ capacity I'm after if anyone knows

Anyone got a link to the meg 225 workshop manuals for doing the cambelt by any chance? Any help appreciated

So today I was heading home from work and I ran out of fuel 😂. My fuel gauge needle isn't working properly so I usually rely on the light to know when it is nearing empty. No light came on. Any usual culprits for it not working?

Not sure if there's a similar thread but I thought it might be interesting to see Basically wanting to know what Mileages/Age you have had belt failures when they are overdue. By this I mean with either known previous belt change date and mileage or belt failures from brand new Many people in...

Anyone into bodywork here? I'm replacing a quarter on a clio and am having to drill a ton of spot welds. I'm using this kit I'm finding the points are dulling very quickly so keep slipping off the punch holes. Any advice on fastest way to remove other than this method? Thanks in advance 🙂

Anyone know what they are looking at here? The fault is popping the engine management light up, I can switch it off but will come back on after a while. Is it a problem with the sensor ir wiring or just the fact I'm using a sportcat that it's coming up?

Anyone replaced their horns? Mine have packed up and mot is due

I'm due belts soon and my pulley is really worn and has a fair amount of wobble. I'm looking at these replacements as they are far cheaper than the Renault items. Anyone tried one or another aftermarket brand? Any input appreciated. Part number matches the OE pulley...

Good discount with some sellers at the moment. Use FALL20

Anyone have any experience with both? Wondering which one to go for. Also which variant of the pms as there are 2 thicknesses Whiteline ARB is currently £160 with ebay code so slightly cheaper but the pms looks like its better quality. The whiteline always looks s**t second hand too as the...

Spotted this at beaulieu, don't think iv ever seen a lutecia over here Had some Japanese stickers in the rear quarter windows and was left hand drive so guessing its one originally supplied for the Japanese market then imported over? Maybe the owners in here

Not Mine but could be a good project for someone https://www.ebay.co.uk/itm/353527698577

So iv had my inlet aquablasted on my 16v, all looks clean but a friend of mine recently had the same work done and a load of grit got into his engine as there must have been some left in the inlet This has concerned me a bit as I can't see any obvious grit in mine and have run a hose through...

Anyone fitted one without a cage? Wheres best to mount it as I can't really see anything to mount it to? Thanks in advance Rich

This is on my mk1 clio rather than a mk2 but there seems to be alot of helpful people in here Basically iv managed to cross thread one of the hoses to the rack and isn't holding a seal. What are my options here, anyone have any experience with these sorts of repairs? I have ordered a tap to...

i always assumed the RS tuner was locked to one car for the maps, is this also the case for the modules? I have tried switching airbag lights off on 2 other cars now and it allows me to switch off each airbag sensor but the light stays on and the codes are still there Is this just a way to get...

So when is everyone switching from winter to summer wheels? Is it too early?

Anyone on here who owns a mk1, pop a pic in this thread if you would 😊 would be nice to see whose lurking in here like myself Here's one of my mine to start 😊

Anyone on here? Always see it outside the tyre place. No number plates either so guessing it lives there?

Has anyone got any experience using the RS tuner with diagnosing issues with abs So the error I'm getting according according the RS Tuner are DTC5023 Rear right sensor signal(unknown status) DTC2033 Rear left sensor signal(unknown status) Then for TCS light DTC5110 Steering Angle sensor...

Hope its ok to post on here about a megane but I'm assuming there's some knowledge in here for them I have an issue where the gearstick on my megane 225 sticks between 1-2nd in neutral and is difficult to get 3rd or 4th Seems like a common issue, does anyone know what I need to replace to fix...

Anyone on here? Looks pretty tidy with some nice bits on it? Trendlines/carbon fuel cap private plate Drive past it all the time Rich