bearing

hi , so yesterday i got some new rear brake pads , fitted the drivers side with no problems , went to fit the passenger side and thought i would remocve the discs to give them a clean , the disc was seized on because of the bearing , eventually got it off but the bearing split in 2 , leaving...

hello, been browsing on here for a while and although i have a megane 225 cup ive saw a few posts that i reckon there is a few tech's on here. Reckon my swivel hub bearing is away on my megane whichever direction i turn the wheel the car doesnt autocorrect to straight it will stay in that...

The bearing in the strut has shattered into a million pieces. Can you get this separately and were can i get one from asap?

hi there just wondering if any1 could help me there is i noise coming from the rear of my clio am guessing its 1 or mibbi both wheel bearings where is the best place to buy quality wheel bearings as i am going to be using the car on track and dont wana buy rubbish bearings thanks billy.

Looking to source a big end bearing kit and a set of piston rings for all four cylinders for a Clio Cup 172 F4R. Have searched Google and it does't seem like anyone stocks them? Searched the forum and can only see some chap saying they were $80/per cylinder but with no reference to where he...

Am I best off just buying new discs/pads and bearings? Any recommendations on where to buy? Saw a thread on here that someone was selling pairs of brembos with bearings and pads for around £100 posted. Thanks.

Hi all, before I start I just need a little reassurance that this is the correct rear bearing for a 2002 172 Cup as Haynes isn't a lot of help :mad: only showing the drum setup. It measures 52 o/d x 25 i/d x 37 wide.

Hi guys, looking to replace the wifes front wheel bearing but seems there is two sizes. It's a 53 plate 1.2 dynamique (with rear drums which seems to make a difference) Seems they come in either 65mm or 72mm Anyone able to help or just a case of buy both and see which fits? Thanks

Hi all, The bearings have gone on my engine, not ideal. Looking at secondhand engines at the minute. Question is, is it really worth it? I'm getting tired of how much its costing on fuel and insurance and I have a backup 106 quicksilver to scoot around in. I do love the car to bits though. I've...

http://www.gsfcarparts.com/parts/steering-suspension/shocks-components/suspension-strut-mount-bearing Any good? Or likely to last ten minutes? Euro car parts aren't the best but thought GSF were ok. No absolute need to replace the rubber caps too?

so really i was just wondering if anyone can help, for like a month or so now when i reach 40mph there is a really loud and can get pretty violent ( towards 60mph) droning noise comming from the rear of my car..for a while i didnt really know what it was, i thought it might be the exhaust or...

So went to do the bearing today, got it off in literally 2minutes. Looked around for someone to press it out. Halfords auto centre were the only ones open around so had to settle for them. The guy on reception said yeah just give him some beer money when he comes out. Guy comes back with no disc...

After the race at Brands last Monday I noticed the paint had bubbled on the rear wheels which I thought was odd! It turns out the heat which caused it to happen was from the bearings getting really hot and after checking them today they are absolutely f**ked. I have undone both rear hub nuts but...

I keep wasting a lot of wheel bearings, both original ones and the ones sold by k-tec. Most of the faliures caused by the drive shaft nut getting loose. Clean drive shaft, correct torque and new nut every time. Anyone have a solution?

Ok, bit pee'd off to say the least as Nurburgring is 2 weeks away, changing my wheels today i noticed that the whole wheel/brake disk wobbles. Could this be the wheel bearings? Everything is tight, i checked driveshaft, brake disk, spacer, hub to coilovers and they are all tight. I also had...

I was just wondering if the Suspension Top mount bearings on a normal clio are the same as the clio sport ones?? Because i was going to order 2 new ones 2moz but i phoned up on friday and they sed all the top mount bareings are the same on all clios. I just thort i woud find out off some one on...

Alright guys, Just got a ph2 172 cheap. It needs a CV joint, clicks sometimes when turning, it came with a cv joint in the boot, how easy is it to do? Also, I have a wheel bearing going. Presuming its the rear, and I get bearings that are pressed onto the disc already, is it a case of just...

Can anyone tell me what they paid for this job? I have the bearings from K-Tec so just need the labour. It sounds like a bit of a job to remove the hub and rear discs yourself to have them pressed out and new in. Have had a quote of 5 hours labour all in from one decent independant. Based in...

Im looking on getting some hubcentric spacers but just wondering do they affect wheel bearings or cause any other damage in the long run Thanks

Hi people can someone put a link up from eBay for the bake brakes sets please as I no it's best to get genuine ones and want to make sure I get the right ones.thanks

Ok, lets try to explain this as best I can... When pressing the clutch I have a noise which resemmbles a bird chirping, I diagnosed this as the thrust bearing following a post on here. Anyway, 12months on I still haven't changed the clutch as It drives fine, so I haven't bothered. Recently, I...

Hi all, I appreciate I'm new, but does anyone in or around cambridge have a 3 arm puller? Just gone to do my rear discs with my mate and the bloody bearing is stuck on the axle :( Call / text me on 07783059813 if you can help please Thanks Dean

any one else had this basically when i get to just under 40mph i get this droning noise from the front ive had a passenger say its my nsf but from where im sitiing i cant tell trouble is after 40mph it seems to dissappear any body else had this

Quick question : Should the rear wheel bearing come out from the front or back of the disc!?! cheers

Evening All, I have just purchased a 197 FF (Cup Pack) and the drivers rear wheel bearing is a little noisy. Im going to replace both, but can anyone advise the torque setting when I change them please? Thanks Byron:)

I've got a whining / whurring noise on my ph2 172 when it's in gear and decelerating. It's fine when accelerating. A garage has had a look today and said the bearings in the gearbox have gone. Which bearings as I can't seem to find the parts anywhere??

as im new to clios i dont know this so sorry if its silly :). is it easy enough to remove and refit the discs and wheel bearings without damaging the wheel bearing? thanks

As above really. Will be doing my discs hopefully soon. The bearings I have ordered I believe come with only one circlip. Is this correct? Or should there be two, one on inside of bearing, one on the outside. any help is greatly appreciated as always!

Im wondering how hard it is to take out a wheel bearing and put them into replacement discs? reason being.. my warranty covers bearings but not brake discs so il give the car to renault to change the bearings then in a few months when i goto change the discs il hopefuly manage to swap them over...

Hi all does anyone have any experience of these Orbis wheel bearings that Euro Car Parts sell. The price is very tempting!! Thanks