bearing

Hello .. Can anyone help me with the procedure for changing the Main Bearings in the Engine of a Clio 1.4 Sport 16v. Thanks

Hi, as stated in the title I'm getting a loud noise from the rear of the car as if the wheel bearings have gone. I had the bearings changed and the noise is still their. I'm now being told it could be the tyres, is this possible or is their anything else I should be checking???

Does anyone know the cheapest place to buy and fit a front wheel bearing??

Hello. My front wheel bearings need replacing in my 182. I have had a search and not found much info on the fronts. Is it a big job to change the front wheel bearings? Non genuine replacements ok to use? Thank you

Finally got my hands on a disc puller and its removed the disc but left half the bearing on the stub. Any tips on getting the rest of it off? Cheers

Ok, My drivers side rear bearing is almost shot so I plan to replace and do discs at the same time (press fit and all that). I see K-Tec have a kit of there own and also sell the OEM ones too... K-Tec kit (inc pads) - http://www.k-tecracing.com/show_product.asp?id=1574&appid=2 OEM (no pads) -...

I have a clio 182 and for the past year the rear bearing have been a big problem!!! they have been replaced 5 times this year!!!! i use the car for tarmac track days bout 4/5 times a year. bearings last went in july this year, which in turn i had to change the stub axel and shock absorber too...

hey, need to get my wheel bearing pressed into hub and wondered if there was someone near to bromley/orpington that is able to?

hi i have bought a new rear wheel bearing for my 2003 clio 172 cup, an i have removed the rear hub to get to old bearing pressed out an the new one pressed in. the problem is i gave the hub to one of my work colleges an they have take it it to a garage an they have told them that it is all one...

Hey guys, I have a whistle coming from engine but when I put the clutch pedal down the noise stops soo have been advised to get a new clutch and bearing :s But where should I get it done?? N how much am I looking out? Thanks for any help or tips Cheers Josh

Have noticed a "plastic" sounding clicking noise coming from the gearbox area when changing gears (intermittent) and when revving engine/coming off revs (constant), so with that I suspected the lower engine mount possibly. The dogbone is fine, gearbox and upper engine mount recently replaced. So...

Does anyone know where I could get the spacer that sits behind the wheel bearing on the stub axle without going to Renault, would love to get one today?? Cheers

Hi does anyone know what the Renault part number is for the con rod bearings for a Clio Williams and the main bearings for an F4R please? Thanks Ashy.

got my car going into total control racing in the next couple of weeks for a shed load of work to be done, the clutch is one of the jobs being done. iam getting the parts myself and lee has told me to order a spigot bearing along with the clutch kit and release bearing, what is a spigot bearing...

Hi guys Am I right in saying in order to replace the rear bearings on the car that I need to replace the whole disk assembly as the bearings are in built? If this is the case how much can one expect to pay incl of disks fitted? A rough estimate. Scott

We have gone through three wheel bearings in three weeks, initially we put it down to poor workmanship at our local garage, due to them possibly over tightening the wheel hub nut, the first two failed within 20 miles, the third wheel bearing was replaced having the wheel hub nut torqued, but...

I need to replace the rear bearings, the discs are in good condition so would rather replace the bearings than whole setup. Does anyone have the size or part number I can use? SKF, FAG etc... Cheers, Mike

Anyone know the part number or ebay link for a front wheel bearing kit for a 53 plate 172 ? as mines is starting to go thanks !

The brakes and disks were changed on my 182 by the dealer before I picked it up. But after about 2000 miles there is a noise from the driver side rear that makes me suspect a duff bearing. Do I have to replace the rear disk as well as the bearing? I can't remember if they come as one item, or...

http://i207.photobucket.com/albums/bb251/wrx_king/mk1-172/f2c7ae4f.mp4 I'm guessing they shouldn't rattle like that? Anywhere apart from Reno sell them? Test built up the bottom end before doing it properly this week and noticed this. Thanks

Is there a How To Guide for changinf front wheel bearings on the clio on here anywhere? Can someone link me please? Couldn't find it with a search :(

??

Erm, i've kinda come to the conclusion the awful droning noise i can hear when driving above 50 is a wheel bearing problem. Done a bit of research into it and apparently its one of the symptoms. So here i am: 1. What happens if i don't get it fixed sharpish? 2. How much is it to fix? 3. How...

while driving i have noticed whirring / grinding sound (sometimes hard to tell weather its a rough road surface or not). i have just jacked the car up and span the wheels and they span freely but the rear drivers side had a constant faint grind to it where as the rear passenger wheel had like a...

Are there any visible signs of a wheel bearing gone or on its way out? I had the rear(s) replaced about this time last year and it appears the NSR is on its way out... again. Grrr! So apart from the what can only be described as a whirring/grinding noise, which is similar to the noise I...

On the internet someone is suggesting ‘RTV Sealant’ which is a 2 part rubber type mix, but what is the best stuff to use thats readily available? Ta

was wondering if a mark 3 (2007) front wheel bearing will fit a mk2 (2004) clio cheers

A few questions. Basically I had 2 fucked wheel bearings on the rear, so replaced with genuine renault discs with bearings already pressed in etc (From Renault on trade). This was back in March I think. I have recently got a really bad droning noise coming from the rear of my car that happens...

my clutch release bearing has started to make some right funny noises,so looks like a new clutch job. i have searched through a fair few threads on here about uprated release bearings but none of the threads state where to get one from apart from (yozza??).does anyone where to get one? or is it...

anyone know of any decent websites or places i can source a cheap front wheel bearing and hub for my mk1 1.8 Rsi? i live in north yorkshire near york if that makes any difference, any help would be greatly appreciated. cheers