172 Cup
Hi folks, wonder if anyone can help me, Ive just replaced the passenger bottom ball joint and the bolts that came with the new ball joint are 12mm and the ones on my car are only 10mm.
Ive done a lot of reading past threads about ball joints and see that everyone seems to say that RS wishbones use 12mm bolts.
I have fitted the new ball joint with the original 10mm bolts as the new ones wont fit through the holes in the wishbones but is this adviseable? I dont want to be altering the geometry any.
Thanks in advance,
Scott.
PS. Would making the wishbone holes bigger be an option or a bit too much of a bodge?
Ive done a lot of reading past threads about ball joints and see that everyone seems to say that RS wishbones use 12mm bolts.
I have fitted the new ball joint with the original 10mm bolts as the new ones wont fit through the holes in the wishbones but is this adviseable? I dont want to be altering the geometry any.
Thanks in advance,
Scott.
PS. Would making the wishbone holes bigger be an option or a bit too much of a bodge?