Having owned this for nearly 12 months now and 9k miles, i think its about time i started a thread. The car is not heavily modified, its still close to factory spec but i am gradually now looking to improve in the little areas.
Present mods are only a KTR decat pipe and Pipercross panel filter.
Firstly some pics....
Wide Angle by Adam Melville, on Flickr
Front by Adam Melville, on Flickr
Angle by Adam Melville, on Flickr
F4R by Adam Melville, on Flickr
Rear by Adam Melville, on Flickr
Front by Adam Melville, on Flickr
Back by Adam Melville, on Flickr
197 by Adam Melville, on Flickr
First job was a full service (coolant was also done although the coolant bottle is not present in the pic)
20150214_130741 by Adam Melville, on Flickr
I would definitely recommend having the gearbox oil changed, the changes are much slicker with fresh oil in there and as we know they're not the strongest point on the Clio 3RS. My 'box was replaced around 12 months before i bought the car at 34k; my 197 has done 55k miles.
Other jobs are mainly a bit OCD related, new oil cap and new CUP badges.
20150214_154605 by Adam Melville, on Flickr
20150214_153645 by Adam Melville, on Flickr
Having had the Flexi pipes replaced last year, i looked into upgrading to Powerflex engine mounts. Presently i have only had the Torque bush fitted and for the cost its mod well worth doing. You can tell there is less engine movement under hard acceleration and the gear change feels a bit more precise (although as mentioned above, new oil will also help). Not sure i will have the other 2 engine mounts upgraded to Powerflex items as the dashboard does rattle quite a bit now.
Powerflex Bush by Adam Melville, on Flickr
As the MOT is due on the 4th April, i have ordered Goodridge braided lines (not pictured as they are presently with the garage i am having the work done) and Motul RBF600 fluid.......
Motul RBF600 by Adam Melville, on Flickr
and i am also having these beauties put on the car once they are back from the wheel refurbers....
20150201_181516 by Adam Melville, on Flickr
Always wanted a set for my car so really looking forward to getting them fitted. They look mint in the pic above but there's a few marks and a nasty kerb mark on there and i want them to be perfect.
So that's it for now, future plans....
New discs (Brembo OEM)
New front Pads - Brembo OEM or Ferodo Fast Road pads from KTEC.
ARB Polybush
Powerflex gearbox mount bush
Rear torsion Polybushes
Front control arm Polybushes
Cat back exhaust if a second hand one appears at the right price
Adam.
Present mods are only a KTR decat pipe and Pipercross panel filter.
Firstly some pics....
First job was a full service (coolant was also done although the coolant bottle is not present in the pic)
I would definitely recommend having the gearbox oil changed, the changes are much slicker with fresh oil in there and as we know they're not the strongest point on the Clio 3RS. My 'box was replaced around 12 months before i bought the car at 34k; my 197 has done 55k miles.
Other jobs are mainly a bit OCD related, new oil cap and new CUP badges.
Having had the Flexi pipes replaced last year, i looked into upgrading to Powerflex engine mounts. Presently i have only had the Torque bush fitted and for the cost its mod well worth doing. You can tell there is less engine movement under hard acceleration and the gear change feels a bit more precise (although as mentioned above, new oil will also help). Not sure i will have the other 2 engine mounts upgraded to Powerflex items as the dashboard does rattle quite a bit now.
As the MOT is due on the 4th April, i have ordered Goodridge braided lines (not pictured as they are presently with the garage i am having the work done) and Motul RBF600 fluid.......
and i am also having these beauties put on the car once they are back from the wheel refurbers....
Always wanted a set for my car so really looking forward to getting them fitted. They look mint in the pic above but there's a few marks and a nasty kerb mark on there and i want them to be perfect.
So that's it for now, future plans....
New discs (Brembo OEM)
New front Pads - Brembo OEM or Ferodo Fast Road pads from KTEC.
ARB Polybush
Powerflex gearbox mount bush
Rear torsion Polybushes
Front control arm Polybushes
Cat back exhaust if a second hand one appears at the right price
Adam.