dmacmillan
ClioSport Club Member
Clio Sport 172
Hey All,
The wee Clio has been transformed after many moons off the road. Many thanks to Nick Benton, Pure Motorsport for such quality products and his tireless counsel. Clio expertise is scant in NZ - the project would have been a random walk without him.
Here is the tale of the tape ...
PM/Bilstein coilover kit
PM wishbone kit - strengthened and bearings
PM rear axle stiffening and bearing kit
PM bump-steer kit
PM roll-centre correction kit
PM quick rack
PM A/C and PS delete with lightweight pulleys
Laguna hubs with PM camber strut plates
PM Brembo four pot and 300 mm disks with DS300 pads
PM Tilton pedalbox and bracketry
Tilton bias adjustment
Quaife ATB diff
K-Tec brake ducting
PM stud conversion
PM ITBs
PM Strut brace
DTA Fast S40 ECU
Cams 438
Group N clutch
Lightened flywheel
PM oil catch tank, breather plate and coil relocation bracketry
PM fabricated aluminum radiator with Comex fan and controller
Oil cooler
Forge coolant hoses
Competition engine mounts
PM racing gear linkage
Cartek PDM and battery isolator
Whiteline rear swaybar
OBP hydraulic handbrake
ATL D-Cell fuel tank
Racetech Dash2Pro
XSport Racing kevlar/carbon bonnet, boot and doors
CM Composites dash and rear spoiler
Gearbox casing strengthening
Speedline 16" Turinis
Cage
Lexan MR10 windows - doors and rear quarters
Plastics4Performance tailgate
Heated front screen
Sabelt seats and harnesses
Sabelt RenaultSport steering wheel
Rewire
Brake replumb
Fuel replumb
Has c.187 whp and weights c.905kg without fuel (and me). Happy with power, thought it would weigh less.
A few photos attached.
Importantly, in need of tuition to get the best out of the wee thing.
Cheers,
David
The wee Clio has been transformed after many moons off the road. Many thanks to Nick Benton, Pure Motorsport for such quality products and his tireless counsel. Clio expertise is scant in NZ - the project would have been a random walk without him.
Here is the tale of the tape ...
PM/Bilstein coilover kit
PM wishbone kit - strengthened and bearings
PM rear axle stiffening and bearing kit
PM bump-steer kit
PM roll-centre correction kit
PM quick rack
PM A/C and PS delete with lightweight pulleys
Laguna hubs with PM camber strut plates
PM Brembo four pot and 300 mm disks with DS300 pads
PM Tilton pedalbox and bracketry
Tilton bias adjustment
Quaife ATB diff
K-Tec brake ducting
PM stud conversion
PM ITBs
PM Strut brace
DTA Fast S40 ECU
Cams 438
Group N clutch
Lightened flywheel
PM oil catch tank, breather plate and coil relocation bracketry
PM fabricated aluminum radiator with Comex fan and controller
Oil cooler
Forge coolant hoses
Competition engine mounts
PM racing gear linkage
Cartek PDM and battery isolator
Whiteline rear swaybar
OBP hydraulic handbrake
ATL D-Cell fuel tank
Racetech Dash2Pro
XSport Racing kevlar/carbon bonnet, boot and doors
CM Composites dash and rear spoiler
Gearbox casing strengthening
Speedline 16" Turinis
Cage
Lexan MR10 windows - doors and rear quarters
Plastics4Performance tailgate
Heated front screen
Sabelt seats and harnesses
Sabelt RenaultSport steering wheel
Rewire
Brake replumb
Fuel replumb
Has c.187 whp and weights c.905kg without fuel (and me). Happy with power, thought it would weigh less.
A few photos attached.
Importantly, in need of tuition to get the best out of the wee thing.
Cheers,
David
Attachments
Last edited: