Clio growing Muscles!!!

[prince_zorro]

mATES,

IN short...My car (clio172 ph2) is armed with:
cams, 182 manifold, uprated pistons, decat, AND JMS MANIFOLD (Thankx to James)...

Got with rstuner perfomance analyser:
power: 146.34 KW
Torque: 201.45 at 6939 RPM

still i didn't do any live tuning to the car..

what do you think all???

 

[The_Pirate]

So its around 190(ish) bhp? Charts a bit erratic?

 

[prince_zorro]

it's almost 196 bhp...need serious mapping i guess..!

 

[The_Pirate]

Aye possibly mate! Must be a quick one then!

 

[stephen chadwick]

torque figure is pretty impresive isnt the std figure around 140-150?

 

[The_Pirate]

149lb~ft IIRC

 

[prince_zorro]

car is fast...but it will be faster after the mapping...(i hope so)..

 

[Fred@BTM]

I'm back out in Abu Dhabi again for xmas

 

[Jamesstone]

Looking good mate, The Rs2 responds really well to a tailored calibration, especially in the mid-range/high rpm, glad the kit finally arrived, you didn't hang around getting it fitted!

 

[mr.pink87]

1500 kg is a bit much isn't it?

 

[Steven103]

torque figure is pretty impresive isnt the std figure around 140-150?

His torque figure is in Nm. 200~ Nm = 150~ LbFt


Curiosity: how accurate are RS tuners for this sort of thing? (open ended question given you can calibrate a RR to read anything)

 

[MonkeyKnifeFight]

195 whp??

 

[prince_zorro]

Looking good mate, The Rs2 responds really well to a tailored calibration, especially in the mid-range/high rpm, glad the kit finally arrived, you didn't hang around getting it fitted!

James!!

Thankxxx again for yo help mate...fitting the rs2 wasn't that smooth mate..;-)...it took almost 12 hours in total...still am getting the uprated engine and gearbox mountings, need also to move or put a small batterie to accommodate the piper filter;-)...

 

[prince_zorro]

I'm back out in Abu Dhabi again for xmas

You never know Fred...I might invite u to Qatar for a quick mapping...

 

[prince_zorro]

1500 kg is a bit much isn't it?

Don't think so!...car is almost 1250 kg....me and me mate almost 200...he's a bit fat;-)..and some spares in the trunk..
....;-)..

 

[prince_zorro]

His torque figure is in Nm. 200~ Nm = 150~ LbFt


Curiosity: how accurate are RS tuners for this sort of thing? (open ended question given you can calibrate a RR to read anything)

Well..Steven..

I'll take the car next week for a dyno..and will see about the figures ;-)

 

[prince_zorro]

:race:

 

[prince_zorro]

check this small update:

http://www.youtube.com/watch?v=wBy0FALiI-Y[/VIDEO]

 

[koi]

Curiosity: how accurate are RS tuners for this sort of thing? (open ended question given you can calibrate a RR to read anything)

I would say not very, you need to enter the weight of the car and then find a nice flat road. Also wind will affect it as well.

 

[BlazeYouQuick]

:drunk:

 

[prince_zorro]

ONE MORE VIDEO UPLOADED..

http://www.youtube.com/watch?v=0M3-cFTr60w

 

[Ralphizzle]

check this small update:

http://www.youtube.com/watch?v=wBy0FALiI-Y[/VIDEO]

A Real Live rolling road!?

 

[prince_zorro]

A Real Live rolling road!?

the only empty road in this town......what do u think???