clio MK3 1.2 with K&N 57i and Sebring exhaust

[adam1942]

After being away last week I got a video of my new sebring exhaust with the K&N 57i installed

http://www.youtube.com/watch?v=d9qWT3KI5l4

the quality is crap but you can hear it give a nice roar!

not bad for a 1.2 TCE also when driving normally its absolutly silent!

Anyone that thinks an exhaust and air filter give you more ponies is lieing but it does make a nice sound!!

adam.

 

[jesus]

Sounds decent that!

 

[Brett]

Anyone that thinks an exhaust and air filter give you more ponies is lieing but it does make a nice sound!!

+1 I noticed no performance difference when I fitted my stealth.

It does sound good mate. I'd get a full turbo back exhaust if I where you, along with a remap that would make a pretty noticable difference.

 

[adam1942]

i'll maybe see about a remap its only a 1.2 turbo remember nothing else is really needed as it'll sadly never be 'fast' it might be nippy for a 1.2 but never fast sadly! + thanks jesus I love the sound I also love the fact when driving normal its near silent!

 

[Brett]

The turbo back exhaust would just be good because you remove the cat which will give an even better noise and more boost sound. Just an idea.

 

[Plummer]

Anyone that thinks an exhaust and air filter give you more ponies is lieing but it does make a nice sound!!

The RR I did proved otherwise,.

 

[Perrinho]

It depends what you are starting with, if you have a 70bhp car, and you get 3bhp then you aint gonna feel it, but if you have 180 and you get 10bhp, then chances are you will....It also depends on the type of induction kit and exhaust, some have been known to lower performance, some not...

 

[cat171]

i'll maybe see about a remap its only a 1.2 turbo remember nothing else is really needed as it'll sadly never be 'fast' it might be nippy for a 1.2 but never fast sadly! + thanks jesus I love the sound I also love the fact when driving normal its near silent!

Much better gains & driveability will be had from mapping a turbo car over an n/a one

 

[adam1942]

sweet I think there was claims of 40bhp +(obviously balls with out going boooom!) with the remap but injectors run 100% with the stock map at 6000rpm so wont be any change higher up the RPM range but I think lower down there is 20bhp (or close to it) increase with a shed load of torque (see here http://www.fastchip.nl/images/stories/fastchip/1.2-tce-std-remap.jpg)

I've emailed the guys at fastchip to see if they have any rstuners free that I can purchase everytime I check the website it says out of stock .. maybe get a custom map see how it runs

 

[Plummer]

It depends what you are starting with, if you have a 70bhp car, and you get 3bhp then you aint gonna feel it, but if you have 180 and you get 10bhp, then chances are you will....It also depends on the type of induction kit and exhaust, some have been known to lower performance, some not...

I started with 60 and got an increase of 7.5bhp :rasp: