Cropper’s 200T

[Cropper]

Hi Guys,

So I’m 3 months into owning my 200T Cup and I must say I was 50/50 on them when I first test drove it, the gearbox being one factor as I’ve always had a trusty manual but I’m fully converted. I know these get a lot of stick but in the right place at the right time they lift the bar in terms of hooning around.

Coming from a modified AG200 it was only a matter of time until the modifiying started even though I said I’m not messing with this one!

So my first job was more noise.. so I have removed the centre silencer which for £80 is a great addition and the way it should of been from factory.

I have just took delivery of some H&R lowering springs from @George@RTR_Parts 16mm Eibach spacers for the front and PMS 10mm Axle Spacers.

Based in the north west so Carl will be fitting these in the next couple of days hopefully in time for CSF.

Here’s so pictures for you guys ?
As you can see that arch gap is rather large when it comes to the front on these.

 

[Cropper]

Black badges have been added since the above picture and rear clio has been removed.

 

[Clio_fool]

Looks good mate. I think we're set for the biggest Mk4 turnout ever at csf this year!

 

[Cropper]

Looks good mate. I think we're set for the biggest Mk4 turnout ever at csf this year!

It’s defiantly looking that way! More the merrier I vote, hoping I’ve got all the mods on before coming up on the Friday!

 

[RMDavis]

Car looks aweome mate!

Looking forward to seeing it at CSF, and have a good catch up!

Sent from my G8141 using Tapatalk

 

[Cropper]

Car looks aweome mate!

Looking forward to seeing it at CSF, and have a good catch up!

Sent from my G8141 using Tapatalk

Thanks mate! Defiantly, looking forward too it!

 

[George@RTR_Parts]

Looking good Michael, they sit really well on the H&R springs and spacers , do a before and after shot if you get chance mate

 

[Cropper]

Was a bit of a rush this week, got the parts fitted on Thursday and I must say I was made up with the way it sits now.

The problem I have is I have extended wheel bolts on the front now, and for some reason I constantly think there going to snap when I enter a bend of some sort so bolt to hub is on the cards soon.

First drive was to CSF on Friday, wrench in the back and a jack I feared the worst but no problems. Well apart from aquaplaining on the motorway a lot more..

Here’s some pics at CSF, I forced @MartinL1993 and @kieranmountford to get some pictures with it.

 

[Gus]

Got a good pic of your car .

 

[Gus]

 

[Gus]

Love the last one

 

[Cropper]

There class! The last one is a top photo!

 

[Storm_Force]

Did you just spray the diamonds? been thinking about doing mine (flame red 200T) was the CLIO badge much of a pain to get off?

 

[Cropper]

If you go on eBay and search for diamond performance they do a straight cover for front and back for around £40 mate. The Clio on the back, you can heat gun it or just get a bit of dental floss behind it and skim it off. T Cut after it and it cleans up a treat.

 

[Norbury90]

Will need to get back to some Cars and Coffees if you are going to be bringing the 200 along in future, it looks good!

 

[Cropper]

Will need to get back to some Cars and Coffees if you are going to be bringing the 200 along in future, it looks good!

Defiantly mate... I wouldn’t where you’d disappeared too! Still in the Clio?

 

[MartinL1993]

View attachment 1383161View attachment 1383162View attachment 1383163

That last photo ❤️❤️❤️

 

[Norbury90]

Defiantly mate... I wouldn’t where you’d disappeared too! Still in the Clio?

Yep it's still going strong, just about. I have put over 60k on it since I bought it. I do keep having thoughts about entering into a terrible financial agreement to buy something new but I haven't been brave enough yet. Will keep an eye out for you from now on, should be easy to spot!

 

[Cropper]

Yeah I’ve got the plate on it now so I’m not hard to miss ? all depends on what finance agreement you can get to be fair! I got 2% interest which can’t not be sniffed at