ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
As M4D M4X said I also have heard they run laguna hubs but if you've tried that i'm not too sure! I'm presuming we are talking about an mk2?
mk1 lagunas are 40x84x38 or 40x84x39.7 as far as i can find
M3, Cup racer'd 182
If it states that dimmension and it isnt, Why don't you take the bearing out and go to your local auto factors and try and match it up with a Renault part.
At least that way you'll know what hubs your running post back at let me know
.
Have you spoken to Rsport's?
How about the mk2 laguna's
At least that way you'll know what hubs your running post back at let me know
.Have you spoken to Rsport's?
How about the mk2 laguna's
45X83X39
I supposed you've probably checked Evo but is there no part number on the hub which when put into renaults part system would show up what hub it is and also what bearing is required?
182cup & 172 racecar
Strange,they should be Laguna ones.
Are 182 Cup / Trophys different given the bigger hubs ?
What the dimensions of the 182 Cup one ?
mikekean
ClioSport Club Member
996 C4S, 135i, E30x2
Pretty sure it will be the 2001 bearing, all UK cup racers were PH1 models orgionally so unlikely to be 2006 part.
182cup & 172 racecar
I've got the complete manual,but no part numbers in there,:dapprove:
M3, Cup racer'd 182
Don't they use normal 172/182 wishbones as they use a extended lower ball joint (no10) to give the camber they have.
Here's pics from a email i received from Rsport a few month back.
And by the 2nd pic the bearing size is 40/86/40 Part no 77 11 155 298
Sorry about the quality i'll forward the email to you if you want.
Here's pics from a email i received from Rsport a few month back.
And by the 2nd pic the bearing size is 40/86/40 Part no 77 11 155 298
Sorry about the quality i'll forward the email to you if you want.
182cup & 172 racecar
Don't they use normal 172/182 wishbones as they use a extended lower ball joint (no10) to give the camber they have.
Here's pics from a email i received from Rsport a few month back.
And by the 2nd pic the bearing size is 40/86/40 Part no 77 11 155 298
Sorry about the quality i'll forward the email to you if you want.
No,because the bolt hole spacing is different,if you tried to put those on a standard wishbone,it would need drilling.
It's just not for camber,the 'ball joint' towers are used to keep the roll centre to an acceptable level.
182cup & 172 racecar
This is why we haven't gone for any of this stuff,it's all just such a confusing mix of parts,and can't be arsed with all that.
M3, Cup racer'd 182
Be stronger to help with the extra level of grip also to take the longer and thicker drive shafts iirc
182cup & 172 racecar
You cannot fit parts 10 and 11 to a standard clio set up,they will not go,hence Laguna stuff.
182cup & 172 racecar
Good luck.
Spot on with the size, thats the one after measureing it. Was a bugger to get of (well the remaining inner sleave on the hub after pressing it out - welding torch job)..!!
Black Gold Trophy
This makes an interesting read.
Sorry though, I don't really have much to offer in the way of information other than this link:
http://www.renault-sport.com/en/racing/pieces/
Sorry though, I don't really have much to offer in the way of information other than this link:
http://www.renault-sport.com/en/racing/pieces/
NorthloopCup
ClioSport Moderator
2.0 8 valve and 2.2 diesel mk1 laguna mate.
