ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Few recent crappy phone pics... FAO:H&R thread..
- Thread starter Dansta
- Start date
Iain C
ClioSport Club Member
how low is yours mate?
Weeman sucks ****
That's lower then mine at the rear and mines wound all the way down.
But then you know that, eh dan?
Loooooooooooow.
But then you know that, eh dan?
Loooooooooooow.
Weeman sucks ****
You still waiting for those? You're a boy.
low as they go at the rear, Yozzasports Fred set them up!! just the difference 17's make. Doesnt look that low from a normal angle - it
is bloody low though.
The front cant come down anymore without rubbing loads - at the moment all is good - no rubbing (but I have cut a small piece of the
arch liner out and modded the bumper mount but I believe everyone does this with coilovers)
The rears rub a bit but thats down to a ET37 offset - getting some OZ F1 cups tomorrow with an ET42 offset so should all be sorted.
Knowing my luck will probably rub like fook on the inside! lol. May have to get some spacers for the front but David at K-Tec sells turinis
in ET42 and he says they are fine - should not get any rubbing.
is bloody low though.
The front cant come down anymore without rubbing loads - at the moment all is good - no rubbing (but I have cut a small piece of the
arch liner out and modded the bumper mount but I believe everyone does this with coilovers)
The rears rub a bit but thats down to a ET37 offset - getting some OZ F1 cups tomorrow with an ET42 offset so should all be sorted.
Knowing my luck will probably rub like fook on the inside! lol. May have to get some spacers for the front but David at K-Tec sells turinis
in ET42 and he says they are fine - should not get any rubbing.
i had to take a pic in the petrol station, i dont know why, but it always looks good when in the petrol staion lol. You can see it in those pics, but when u see the bottom sill under the car, (the with where you jack that sometimes bends, that bit....) that runs along the skirt, when you see it runnin so parrallel and low next to the ground, theres just something sexual about it... lol
mmmm
im gonna be a low freak for life. pmsl so sad.
mmmm
im gonna be a low freak for life. pmsl so sad.
Weeman sucks ****
Ted182 said:very low! looks lower than yours chris...
That because it is! His springs have always been lower at the back...plus he keeps bags of sand in there all the time!
the front will be fine but not sure about the back - if you pull the corner of the rear bumper down and put your hand inside you will feel a piece of metal that sticks out quite a lot - if you remove that both sides its a lot better but from that photo I would say you could probably go down 5mm and be ok
Racing Blue 182
have you removed your arch liners? mines started scraping on the rear with no one in it, doing my head in, and mines not as low as yours
Racing Blue 182
think that would make it worse, its rubbing on the outer edge not inner. will take a proper look at the weekend though
