172, Fiesta S1600
Hi folks,
Fairly new here! Recently bought a 172 ph2 non cup in Monaco Blue!
Seen the car on Facebook marketplace and made the trip to somewhere near Morpeth from Glasgow to pick it up! Took my trolley jack and some basic tools along just in case. When we go there I jacked it up and noticed play in both tie rods and the rear arched have been repaired at some point with a bit of rust coming back through so bartered a bit on the price and got it for £700. No MOT but brought it up the road and went to a pre booked MOT where it failed on a ball joint, emissions from a hole in the backbox at the mounting bracket, a bald tyre on very inside edge and the dreaded numberplate light issues!
I rectified this all on the street outside the garage, luckilly the spare was a continental with full tread. There was a motor factors around the corner so got and fitted 2 ball joints and sorted the bulb and pasted the exhaust blow. PASS!
Since then I've washed it, cleaned the inside (disgustingly dirty) got some lowering springs and shocks fitted (for now) as I had a feeling the front springs might have been standard Clio items... Still have the inner tie rods, gaiters and track rod ends to fit when I get home from this work trip.
Plans for this car is to do some sprints and hillclimbs in the road going series production car class and develop the car as I go along. My background is rallying so may build the car in a way that doing stage rallies is a possibility also.
Very good to read through this forum and see what others have done as there is some decent work on here.
Anyway I'll update when I can, usually have quite a busy summer with co-driving or servicing for friends and with a wedding coming up I wont be able to go mad with the funds.
Cheers
Fairly new here! Recently bought a 172 ph2 non cup in Monaco Blue!
Seen the car on Facebook marketplace and made the trip to somewhere near Morpeth from Glasgow to pick it up! Took my trolley jack and some basic tools along just in case. When we go there I jacked it up and noticed play in both tie rods and the rear arched have been repaired at some point with a bit of rust coming back through so bartered a bit on the price and got it for £700. No MOT but brought it up the road and went to a pre booked MOT where it failed on a ball joint, emissions from a hole in the backbox at the mounting bracket, a bald tyre on very inside edge and the dreaded numberplate light issues!
I rectified this all on the street outside the garage, luckilly the spare was a continental with full tread. There was a motor factors around the corner so got and fitted 2 ball joints and sorted the bulb and pasted the exhaust blow. PASS!
Since then I've washed it, cleaned the inside (disgustingly dirty) got some lowering springs and shocks fitted (for now) as I had a feeling the front springs might have been standard Clio items... Still have the inner tie rods, gaiters and track rod ends to fit when I get home from this work trip.
Plans for this car is to do some sprints and hillclimbs in the road going series production car class and develop the car as I go along. My background is rallying so may build the car in a way that doing stage rallies is a possibility also.
Very good to read through this forum and see what others have done as there is some decent work on here.
Anyway I'll update when I can, usually have quite a busy summer with co-driving or servicing for friends and with a wedding coming up I wont be able to go mad with the funds.
Cheers