PH1 172 + 182 Gearbox

[Waitey]

Any way i can get a speedo reading from the abs sensor at the back. Will it work with the dash?

 

[davebem]

There must be a way of fitting the speedo sensor from the old box in the 182 box. Im not sure if a 182box just has a blanking plug fitted??

 

[Waitey]

The sensor hole is the wrong size and theres no internal gearing to run the sensor.

 

[Gray]

The 182 and PH-1 172 run different gear box housings... not compatible IIRC!!

 

[Waitey]

The 182 and PH-1 172 run different gear box housings... not compatible IIRC!!

My PH-1 box and 182 box are next to each other and they are very similar.

What i want to know is can i get a PH-1 to get the speedo signal off the rear ABS ring?

 

[mini-valver]

Unless the rings have the same amount of teeth, I doubt it. Ditch the ABS and use them as wheel speed sensors?

 

[ben_p]

lol, or just buy a ph1 box you tight c**t!

 

[Waitey]

No where has a good one. I was sold a 182 box as a PH-1 172 box so i'm stuck with that too.

 

[ben_p]

you dumb fcuk.

i have a spare psh1 box.