ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Pistachio's Racing Blue 182 Project Thread

Expensive day today but it's nice to have it all done and out of the way. Timing belt, water pump, dephaser and aux belt. Both of the radiators had rusted away around the bottom mounts, so have been replaced with new items. Exhaust is blowing as per usual. Discs are getting low too.

20191212_194725.webp
 
Expensive day today but it's nice to have it all done and out of the way. Timing belt, water pump, dephaser and aux belt. Both of the radiators had rusted away around the bottom mounts, so have been replaced with new items. Exhaust is blowing as per usual. Discs are getting low too.

View attachment 1444436
Hope the proper timing tools were used! Presume you've used them before?
 
Something I've been meaning to do for a while is replace the top dash to get rid of the sticky centre bit. Found two clios at the local scrappy. One was fresh-in and very clean but the centre part was scuffed. I found another, 3 cars high, that was a little dirty from the door being left open but in mint condition. Had a nightmare getting it off because it just wouldn't let go of the airbag unit! I ended up unbolting the airbag just to release the dash. £25 👍

20200320_130603.webp


Cleaned up
20200320_144837.webp


Fitted
20200320_162208.webp
 
I had new front discs and pads fitted a couple of months ago. One of the calipers was also sticking on. The garage said they fixed it but it has been squeaking at low speed since. And over the last couple of days has started to sound worse at speed. So it is booked in to the garage on Tuesday to have a look.

Today I finally fitted the climate panel that I've had lying around for ages, thanks to @RustyMojo who told me how easy it was to fit! It's not mint but it's so much nicer to use! That is now all of the sticky parts replaced in the car :cool:

5ptTlcV.webp


Ignore the dirty carpets
Z3Ylq1u.webp


Also got these black surround headlights to replace the faded xenons. Can't wait to get them fitted 😄
I want to delete the washers too, since they keep pouring all of my screen wash on the floor
1dwPHyB.webp
 
Black halogen headlights fitted today and the washer pipes blocked off :cool:

I might get some carbon blanks eventually

Foggy old xenons
z9cBsRm.webp


OWjZKgb.webp


P8W4W3p.webp


x5xEjU2.webp


1yZJzzy.webp


FwSL4uy.webp


brY3eNg.webp


tA5hJ0e.webp


mVMR1jx.webp


28bVpmf.webp


The fitment certainly isn't as good as oem, but for £60 a pair you can't complain. The front end looks so fresh now :love:
 
Today I got around to a couple of things I've been meaning to do for a while. Also got some plugs and an air filter to go with the recent oil change.

aPihmKW.webp


The door check strap has been clunking for a while
67tvspv.webp


Just remove the single bolt
wRhErky.webp


Tie on some earth sleeving, undo the other 2 bolts and it wil drop down to the speaker hole. It has to be earth sleeving, definitely not string
6RzrzI1.webp


Hk3aTB6.webp


Sexy shiny smoothness
tGBw5tt.webp


I also replaced the snapped fuel rail guard stud, which has been broken since I got the car
sPcrOk5.webp


oYSyOwY.webp


Swapped the plugs and the air filter, then as I was tightening up the hose clamp...
70abawt.webp


So I'm off to B&Q for a replacement 😁
 
Back
Top