Hi guys I recently bought a Ph 1 rs and I have had nothing but grief with a dodgey idle. I am running out of ideas and just wanted to see what you thought.
I have done the following.
replace icv
removed tb and cleaned it
checked all Vacuum pipes behind the tb
Gasket sealed the push in sensors on the inlet
Contact cleaner on all the connectors.
I have a gut feeling it's an electrical problem as it's never the same twice. I also get a little problem sometimes I have to wiggle the spade connector on the starter to get it going.
I was told by someone there should be an earth strap at the back of the engine, I can't see one. :/ lol
I have done the following.
replace icv
removed tb and cleaned it
checked all Vacuum pipes behind the tb
Gasket sealed the push in sensors on the inlet
Contact cleaner on all the connectors.
I have a gut feeling it's an electrical problem as it's never the same twice. I also get a little problem sometimes I have to wiggle the spade connector on the starter to get it going.
I was told by someone there should be an earth strap at the back of the engine, I can't see one. :/ lol