Power Tool Perverts

[Crybert]

Cheers gents!

 

[Flat Eric]

I've got the bosch twisted spade bits and they are savage

 

[thecrim22]

Use a cutting oil when drilling saves the bits no end and makes them last longer as long as your not being a spaz with them and its only a couple of quid

 

[Louis]

Been using my milkandawaulkeetalkee angle grinder today and its been ace. So useful not having to f**k about with a cord. It does go through battery quite fast, need a spare on the charger

 

[dann2707]

Been using my milkandawaulkeetalkee angle grinder today and its been ace. So useful not having to f**k about with a cord. It does go through battery quite fast, need a spare on the charger

They are brill aren't they. Before I bought mine I wondered if it was a bit of a whim but they are pretty punchy!

I use the small one with a flap disc on at all times and it massively helps for battery life

 

[Jamie86]

I love the dewalt extreme2 hss bits. They have a starter point as well which is really useful.

 

[Dom_capper]

Just seen a video of a lad using a Milwaukee drill to power his boat around a lake…. Tried to post it here.. won’t link.
Cool sorry bro

 

[Louis]

Just seen a video of a lad using a Milwaukee drill to power his boat around a lake…. Tried to post it here.. won’t link.
Cool sorry bro

Cheers mate

 

[donnylad]

10% off Milwaukee at Powertoolmate.

 

[jenic]

10% off Milwaukee at Powertoolmate.

Is there a code?

 

[Matt e]

FLASH10

only for 24hrs

 

[jenic]

Good deal, especially considering their prices are already pretty much the cheapest.

Have ordered a couple of things!

 

[dann2707]

Should have got this at the weekend when it was £2.50 cheaper, seeing this 10% off was clearly a sign I should have got it then.

£202 down thanks mate 😂😂😂

Cheers for the heads up.

 

[JamesBryan]

Good boxes are good.

 

[jp_lcr]

10% off Milwaukee at Powertoolmate.

Well that's 2nd Milwaukee tool bought thanks to you 😂 inflator to go with impact for race days

 

[Pep]

Just ordered this which will be a bit better for what I need, after my bit of a balls up on the M12 one I bought!

Anyone fancy an M12 3/8“ impact wrench set, barely used!

 

[iimushroomzii]

Just ordered this which will be a bit better for what I need, after my bit of a balls up on the M12 one I bought!

View attachment 1601390

Anyone fancy an M12 3/8“ impact wrench set, barely used!

How much do you want for it?

 

[dangerous dave]

I got this the last week, m12 Surge.. for anyone whose got signs of tinnitus this is drastically quieter for an impact driver.

the hit is a a totally different tone, like tapping a hammer on wood vs tapper a hammer on an Rsj.

Specs say less torque or some shiz, but it’s how it uses the power that matters..

Definitely would suit almost every none trademen, if you can’t bury a fastener with this, pre drill it you lazy scrote. 😎

I believe all the top brands have a similar pneumatic impact tool in their line ups.

 

[JamesBryan]

Just ordered this which will be a bit better for what I need, after my bit of a balls up on the M12 one I bought!

View attachment 1601390

Anyone fancy an M12 3/8“ impact wrench set, barely used!

You do realise that has the same torque as the 3/8" stubby you're replacing?

Should have got the newer Mid torque tbh, i've got the 1st gen and it's around 800Nm i think.

 

[dann2707]

You do realise that has the same torque as the 3/8" stubby you're replacing?

Should have got the newer Mid torque tbh, i've got the 1st gen and it's around 800Nm i think.

I could be wrong but wasn't it the anvil size that was wrong on the original purchase?

 

[JamesBryan]

I could be wrong but wasn't it the anvil size that was wrong on the original purchase?

Ahh was that what it was?

 

[Pep]

How much do you want for it?

This is the set, feel free to make an offer?

Milwaukee M12FIWF38-622X 12V Fuel 3/8" Impact Wrench Kit (1 x 6.0Ah /1 x 2.0Ah RedLithium-Ion Batteries, Charger & Case) & Sleeve - PowerToolMate

www.powertoolmate.co.uk

You do realise that has the same torque as the 3/8" stubby you're replacing?

Should have got the newer Mid torque tbh, i've got the 1st gen and it's around 800Nm i think.

Yep but I need to run a 1/2” socket to get the rear wheel off my bike so with an adaptor it only just undoes 230nm, so a bigger anvil and no adaptor will do it no probs.

Plus all my other gear is M18 anyway.

 

[Pep]

I could be wrong but wasn't it the anvil size that was wrong on the original purchase?

Yes indeed, you stitched me right up 😭

 

[dann2707]

Yes indeed, you stitched me right up 😭

 

[jp_lcr]

you lot might like this

 

[JamesBryan]

Festool = Vegan kitchen fitter

Dead 😂

 

[dann2707]

Got the packout with intentions of using it whilst camping next week at csf. Its f**king huge 😂😂😂 not gonna fit with my other s**t I'm sure

 

[JamesBryan]

Got the packout with intentions of using it whilst camping next week at csf. Its f**king huge 😂😂😂 not gonna fit with my other s**t I'm sureView attachment 1601571

Quality kit though isn't it.

 

[dann2707]

Quality kit though isn't it.

I have opened the latches on the top box and then had to go out but I dare say that was the nicest latch opening I've ever done. It feels so beautiful

 

[Flat Eric]

Got the packout with intentions of using it whilst camping next week at csf. Its f**king huge 😂😂😂 not gonna fit with my other s**t I'm sureView attachment 1601571

I kean you don't need tontake all 3 boxes do you 🤣🤣🤣

 

[thecrim22]

I kean you don't need tontake all 3 boxes do you 🤣🤣🤣

 

[Pep]

Got the packout with intentions of using it whilst camping next week at csf. Its f**king huge 😂😂😂 not gonna fit with my other s**t I'm sureView attachment 1601571

No wonder you had a big grin on your face flying down the A38!

 

[dann2707]

No wonder you had a big grin on your face flying down the A38!

Did you actually see me? 😂😂

 

[dann2707]

My peepee is standing 1" to attention

 

[Pep]

Did you actually see me? 😂😂

Yeah I was heading up to Mansfield at about 4.30, for some reason I half recognised the reg then saw your pic and put 3 and 35 together.

 

[dann2707]

Going full @Rich-D here 😂😘 but here's another post with some actually useful photos. I'm beyond happy with it. View attachment 1601583

Yeah I was heading up to Mansfield at about 4.30, for some reason I half recognised the reg then saw your pic and put 3 and 35 together.

Ahh were you in your van? I guess you were going a38 northbound? Trying to think where we would have crossed paths lol

 

[JamesBryan]

IP65 too, but just note that if the lid of the main wheely box is soaked, when you lift it up the water does like to run down the back and then inside 😅

Not as bad if you lift it slowly so it can drain off a bit first.

 

[Pep]

Yeah in the LGBT van so not very noticeable

 

[jonzz]

Slippery slope @dann2707! You’ll end up spending £1000s on toolboxes till it’s about 8ft tall. I’ve stopped at about 4ft.

 

[dann2707]

Slippery slope @dann2707! You’ll end up spending £1000s on toolboxes till it’s about 8ft tall. I’ve stopped at about 4ft.

My intentions are to make a huge boat out of one then boat over to South afrika to go see the lions and elephants