Quick question... (Camber shims)

[benhiggs]

Got a set of shims at home needing to be fitted

I have a very limited tool arsenal,
What is the easiest way of going about fitting them to a non sport..?

Was told I could do it without dismembering the drum, if so what head do I need to remove the nut? Its some strange star shaped thing, almost like a reverse torx Haha

Any help would be appreciated

 

[benhiggs]

Ok edit...

What size is the torx nut?

 

[Edges]

Ooh, we had a non sport with drums in at work today and I had a look. Looks like you don't need to take the drum off and you need a E16 I would guess. Female torx socket. I think 16 but can't be certain.

so undo the 4 torx and pull the hub/drum off, then re fit with the shims between the axle and hub

 

[benhiggs]

Ooh, we had a non sport with drums in at work today and I had a look. Looks like you don't need to take the drum off and you need a E16 I would guess. Female torx socket. I think 16 but can't be certain.

so undo the 4 torx and pull the hub/drum off, then re fit with the shims between the axle and hub

Thanks man

Found out its a e12,but I'll give it a shot today