Removing bullets and dash strips??

[CODGEY 182]

As above really people,

Im going to be painting them all and just wanted to know how they come off,

I dont want to be breaking clips etc, Things like this was allways a pain on the old valvers!

Thanks!

 

[john182rs]

With the bullets i know its a matter of putting a flat edge blade on the under side an prizing it off slowly.
dash strips i dont know.

 

[CODGEY 182]

^^ Cheers mate thought as much is there clips etc to look out for?

 

[john182rs]

Nope, not on the bullets, just take ya time.

 

[VeinAST]

Dash strips are pretty much the same, get a flat blade and go for the edge nearest the door!!

Bullets worked fine from the top for me, I gave them a hard tug (which isn't recommended.. )

 

[jack_davey]

Bullets are best removed (to avoid damage) by removing the whole strip across the door.
Open the door, pop the plastic cap off, use a flat blade through the hole to push the bump strip back towards the back of the car.
Best way to remove dash strips, open glove box stick flat blade underneath from the bottom and start with edge nearest door.
Then for drivers side, pop the piece of trim off above the steering wheel, then pull the strip from the side closest steering wheel.

 

[Beef-Mc]

As davey boy said.

 

[CODGEY 182]

Spot on lads genna go play now!

 

[CODGEY 182]

Anybody know if the steering wheel insert comes out to?

Cheers!

 

[SoA2k6]

Most people will recommend taking out the airbag, but a flat blade from the airbag side should pop it off.

 

[adam_socks]

nah dont remove airbag cuz ud have to disconnect battery, just remove passenegr side one from pulling inside the glovebox, and the other one u can just about get fingers down the left had side and pull.....hard
they just pop off

 

[MRBILLYUK]

Just pull the one on the steering wheel very hard . It'll feel like it it's not gonna come off or might break but it won't trust me