Replace o/s driveshaft without undoing strut to hub bolts.

[172_Tom]

As above - is it possible?

Have camber bolts fitted so want to avoid having to re-adjust the camber after replacing the driveshaft if possible.

 

[bashracing]

undo the 2 18mm bolts that connect the lower ball joint housing to the lower wishbone and swing it out of the way,
put the steering in full lock so the track rod is at full extension to make it easier too.

 

[leeds2592]

Yep, no need to undo the bolts.

Did my CV boot recently and didn't undo either strut bolts.

 

[172_Tom]

Thanks chaps!