What's new
By:
Filters
ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Scott's Super Clean PH1 172 Project Thread



M

Mr R.

ClioSport Club Member
  A special one.
Re: My PH1 172

Cheers chap's, rob Friday night after 8 ish and as long as its not raining.
Saturday im at Daves for the day and night.
Sunday im about all day and eve mate.

Sunday would be best but whatever you think is best. :)
 
K

Kyle 86

  172 Cup & Mini C 1.6
Re: My PH1 172

Love this car. Mintest ph1 in the uk dare I say :)

Im seeing ron tomorrow night to drop the airbox off
 
M

Mr R.

ClioSport Club Member
  A special one.
Re: My PH1 172

Scrooge said:
I'm going to the unit tonight to drop wash the motor and let DaveRon pick his car up, we can all go to lakeside for pictures afterwards?
Click to expand...

What time dude, don't forget some of us are up at 5am for work...:)
 
Sunglasses_Ron

Sunglasses_Ron

ClioSport Admin
Re: My PH1 172

If I didn't have to get up at silly o'clock in the morning I'd probably join you at Lakeside. Only one more early start to go thank f**k.

See you in a couple of hours Ant.

:)
 
M

Mr R.

ClioSport Club Member
  A special one.
Re: My PH1 172

Im up at 5 you c**t, anyway its raining and I dont drive my car in the rain so tonight isn't going to happen.
 
Pacman.

Pacman.

ClioSport Club Member
  Did have a R27
Re: My PH1 172

Looking good as always dude! My bro looks like he has done a top job!
 
M

Mr R.

ClioSport Club Member
  A special one.
Re: My PH1 172

I wanted the car to sit a little lower at the front but the Spax coilovers that i had fitted wouldn't allow this, also they where showing signs of rust after only being on the car for just under a year. One of the reasons i bought them is i thought they would have been protected by there powered coating.


Ready for there new owner.

20130923_180956_zpsc6d6ce35.jpg



What and im going to get next, I have a list

FK Sliverline X
KW V2 But might not go low enough.
BC kit that Mick @ Diamond Motors is doing.
AST But don't think i can justify the expensive for my needs.

While the car is up on stands i wanted to get the rear beam powder coated to match the front that i had done earlier in the year, ill also be fitting the Powerflex black beam bushes, Hel braided brake lines, replacing the hand brake cables and all the nuts and bolts.

20130928_130738_zps2fa7d407.jpg


20130928_130943_zpsa870b39f.jpg


Car looking sorry for its self.

20130928_135156_zps3b37e846.jpg


On the day i took the coilovers off i went to see Chris @ Detail Me 1st for some paint correction on the roof and bonnet, there was some scratches that bugged me that i could see under the street lights.

Anyway we agreed a price for 3 hrs work, its not 100% but loads better in the time frame that we had.

20130923_125636_zps2b52056e.jpg


20130923_131645_zps3a11e20d.jpg


20130923_134130_zps7a65d895.jpg


Under the spot lights.

20130923_113020_zps1a99b664.jpg


That`s all for now, im hoping to get the beam into the coaters on Monday morning and ill be ordering the bits i need.
 
S_E_A_N

S_E_A_N

  Ph1 track car, Dci
Re: My PH1 172

Lovely! I had the same suspension on my saxo and it was well rusty within two years, couldnt fault the way it worked though.

Out of intrest why do you want to go lower, it looks well in the pics.
 
M

Mr R.

ClioSport Club Member
  A special one.
Re: My PH1 172

Thanks for the comments.

Now im running spacers it looks as if it needs to be dropped a little at the front, with the Spax i can not do this.

It bugs me so they had to go.
 
M

Mr R.

ClioSport Club Member
  A special one.
Re: My PH1 172

Yesterday i managed to spent a bit of time on the car as it was my sons birthday.

Got the beam off and one of the bushes out, the other side was being a right pain so that was left for today.

20130929_180247_zps149d0061.jpg


20130929_180258_zps6921c3aa.jpg


20130929_182918_zps4a8f458e.jpg


Brake pipe bracket that bolts to the underside of the car looked like it had seen better days, so that's going to be coated as well.

20130929_180324_zps715b0688.jpg



Bits where dropped off this morning, they are mega busy so i have to wait for 2 weeks. :(
 
M

Mr R.

ClioSport Club Member
  A special one.
Re: My PH1 172

This little gift arrived in the post today. :D

Proper cant wait to get them fitted, but it will have to be after my suspension is all back together. :(

20130930_174141_zpsa6c4df39.jpg
 
M

Mr R.

ClioSport Club Member
  A special one.
Re: My PH1 172

My readings from 2010 when the car was done at Tour-De-Force

BHP
20130930_221439_zps458d416c.jpg


Torque
20130930_221540_zpsd57bd9e9.jpg
 
GW200

GW200

  LYV6, 182, R5GTT
Re: My PH1 172

Blimey Scott! What an absolute minter! Subscribed :D

See you when the weathers better and in daylight hopefully next time!
 
M

Mr R.

ClioSport Club Member
  A special one.
Re: My PH1 172

GW200 said:
Blimey Scott! What an absolute minter! Subscribed :D

See you when the weathers better and in daylight hopefully next time!
Click to expand...


Cheers dude, its becoming a bit of an obsessions tbh...lol

I don't think ill be bothering putting the car back on the road until the weathers better, need to buy coilovers and lots of engine bits so i can fit my cams. :D
 
GW200

GW200

  LYV6, 182, R5GTT
Re: My PH1 172

Phase1sr said:
Cheers dude, its becoming a bit of an obsessions tbh...lol

I don't think ill be bothering putting the car back on the road until the weathers better, need to buy coilovers and lots of engine bits so i can fit my cams. :D
Click to expand...

Yeh you might as well keep it tucked up over the winter.

I'm the same with the race car I'm building! Probably spending to much time on bead blasting and painting bits that shouldn't matter on a race car...oh we'll it's the way we are I guess :D
 
G

Giles

  Clio 197
Re: My PH1 172

Really please what you did your ph1 172, keep up a good work!

I did same things few years ago but it was ph1 RSi. :)

pics
IMGP4591eee.gif
 
M

Mr R.

ClioSport Club Member
  A special one.
Re: My PH1 172

421s mate.
182 manifold and de cat.
Ported head and ARP rod bolts.
 
mi16chris

mi16chris

Re: My PH1 172

On the site duration is 276 intake 268 exhaust lift 11.25 intake 10.25 exhaust

My spec sheet says 279 intake 269 exhaust lift 11.30 intake 10.25 exhaust

Not much in it tbh but still lol ;) hope u enjoy theses man
 
M

Mr R.

ClioSport Club Member
  A special one.
Re: My PH1 172

Cheers mate, so the ones I have are better?

Or am I missing something that I don't understand?
 
Ph1 Tom

Ph1 Tom

ClioSport Club Member
Re: My PH1 172

After chatting with AT Power about a few solutions Scott, you're best off going with the Ktec DTH and Gen90 etc. I think
 
M

Mr R.

ClioSport Club Member
  A special one.
Re: My PH1 172

Still waiting on bits to come back and the beam powerflex bushes to be made.

I ordered a few bits from Adam and this little lot turned up, well i cant be putting things back with rusty nuts and bolts. :D

20131007_164616_zps2c155443.jpg
 
M

Mr R.

ClioSport Club Member
  A special one.
Re: My PH1 172

Ph1 Tom said:
After chatting with AT Power about a few solutions Scott, you're best off going with the Ktec DTH and Gen90 etc. I think
Click to expand...

Thanks Tom for the info mate.

I think thats the route i will be going once ive bought new coilovers.
 
You must log in or register to reply here.

Similar threads

J
2001 Clio 172 P1 - Clean OEM Road Project
Replies
20
Views
607
Jaeclio
J
Damon65
Monaco 172 Track/Road project
Replies
3
Views
564
Poopensharten
Poopensharten
PBandA
Project: Ph1 Money Pit
Replies
8
Views
603
Jaeclio
J
P
Matts Clio 182 rolling project thread
Replies
0
Views
687
Pch182
P
stephaniemarshall48
Alot of help required
Replies
32
Views
1K
Cookson
Cookson


Top