Simota Twin Charger Induction Kit for 172/182

[OLLZIE]

Here is the link below. Looks interesting and how would you go about purchasing it?

http://www.simota.com/search_03.php...end=Engine&Make=RENAULT&Model=CLIO&Engine=2.0

 

[Ricardinho]

dont understand, cant see one "charger" let alone two!

 

[OLLZIE]

dont matter looks good though and would be a good ik i think

 

[Ricardinho]

yeh does look good idea, silly name tho..

 

[Lam7r]

Simota have a good rep too

 

[OLLZIE]

they sell this one on ebay alot

http://www.simota.com/search_03.php...end=Engine&Make=RENAULT&Model=CLIO&Engine=2.0

 

[haitch]

looks like the silver tube is more beneficial than most ik kits, as it takes the filter away from the engine bay.

 

[makavelli]

surely all you need to do is stick a bit of alloy piping on a hillpower/itg silicone bend which will relocate an open filter like a piperx or k&n to the point in front of the battery! and fabricate a bracket to hold it

 

[OLLZIE]

Does anyone do this then?

 

[haitch]

if somebody doesnt have an ik it looks ok. the itg silicone bends look too short, where sells an alluminium bend? either way it looks like you would have to get the tube made up, correct length/angle, not sure if it looks like 90 degree in that pic. less bends or not so acute angles are better anyway. some people just want to buy a kit rather than build it.

 

[nathanH]

i do like the look of that, plus Ph-Quick bumper vents feed air to the part where the filter is

just read it properly its for a ph2. doh

 

[OLLZIE]

What about this one. Is it worth getting?

http://www.simota.com/search_03.php?...LIO&Engine=2.0

 

[MRBILLYUK]

How much are these simota twin charger things ?

I still think its better to be fully enclosed but you could probably make your own for alot less using these :

http://www.espdesign.co.uk/esp.storefront/EN/Product/4521

http://www.merlinmotorsport.com/pro...d=173&osCsid=f7035693dd77d9b3f5a032090a9088a2

http://www.merlinmotorsport.com/pro...=4689&osCsid=f7035693dd77d9b3f5a032090a9088a2

or a Hillpower 90 degree bend

http://www.motorspeed.com/store_mai...ubcategory_id=0&int_page=3&int_product_id=664

http://www.espdesign.co.uk/esp.storefront/EN/Product/4501

 

[OLLZIE]

the only thing i worry about is brackets

 

[MRBILLYUK]

You might not need brackets , even if you do its only a 10 min job knocking up a bracket from a bit of aluminium .

 

[OLLZIE]

I might consider this product

http://www.simota.com/search_03.php...end=Engine&Make=RENAULT&Model=CLIO&Engine=2.0

Below is a link of all the kit.

http://www.930sport.co.uk/dp/parts/simota/images/simotacb801.jpg

 

[MRBILLYUK]

^^^^ That doesn't look so bad actually , pretty good price as well .

 

[OLLZIE]

I just wanted to know if anyone has anyone tried it yet?

 

[tameracingdriver]

Am I missing something here? I cant see a price for this anywhere.

 

[OLLZIE]

Prices are on this link

http://www.dpmotorsport.net/parts/simota/renault.htm

 

[Andyman]

Here is the link below. Looks interesting and how would you go about purchasing it?

http://www.simota.com/search_03.php...end=Engine&Make=RENAULT&Model=CLIO&Engine=2.0

The IK must be really small to fit between the battery and the wing. Surley this will restrict performance ?

 

[OLLZIE]

This is the kit but with another filter. doesnt matter what filter it has, you can always change it.

http://www.930sport.co.uk/dp/parts/simota/images/simotast801.jpg

 

[tameracingdriver]

The prices look very reasonable. I think i might try one of these kits out on mine some time. Which one do you reckon would be the best one to go for?

 

[OLLZIE]

the twin charger one.